2012 Ford Taurus Sho Awd 3.5 Ltr Gtdi V6 Ecoboost on 2040-cars

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Hennessey completes first VelociRaptor SUV conversion [w/video]

Start with a Ford F-150 SVT Raptor as your base vehicle for modification, and chances are high that you'll end up with something pretty cool. Now, have those modifications done by professional lunatics Hennessey Performance, make the project turning the pickup into an ultra-long SUV, and the result stands a real chance of being a total kick in the ass. Let us present the Hennessey VelociRaptor then, in all of its awesomeness.
Hennessey has taken care in grafting a "Expedition style" rear cabin onto the Raptor, complete with an optional third row. The pictures we have show a cabin that's up to the fit and finish standards of the original Ford truck, too. The cab added over the bed also makes room for a massive load space out back, accessible via split out-folding doors and long enough for a person to lay down in (see video).
Mechanically, the truck-turned-SUV sticks with Ford's stock 6.2-liter V8, rated at 411 horsepower, or can be had with a supercharger and some 600 hp. Hennessey says the stock-motor VelociRaptor will run from 0-60 miles per hour in 7.5 seconds, while the hi-po version takes just 5.9 seconds. The SUV does take some of the off-road ability away from the Raptor, with the company saying it hasn't yet had the opportunity to test its capabilities. On-roading and "moderate off-road duties" are the current prescription.

Weekly Recap: Toyota, Mazda team up to 'make cars better'

Toyota and Mazda are teaming for a noble purpose: to "make cars better." That's how the two Japanese automakers termed their partnership, which was announced this week. So what does this actually mean? The companies said they will set up a joint committee to look for areas of cooperation and named safety and the environment as issues they plan to tackle. From a product perspective, it's believed that Toyota is interested in Mazda's Skyactive engine portfolio. In turn, Mazda has its eye on Toyota's fuel-cell and plug-in hybrid technology. While more specifics were not confirmed, the companies said the "agreement will go beyond the traditional framework of cooperation," and it has the potential to be a long-range partnership. "The main purpose of this initiative is to enhance the appeal of our cars," Toyota president Akio Toyoda said at the announcement. Previously, Mazda has licensed Toyota's hybrid tech and assembled compact cars for Toyota in Mexico. Akio Toyoda said these projects "triggered" the automakers to explore further collaboration. Dave Sullivan, product analysis manager for AutoPacific, said the tie-up echoes Daimler's wide-ranging work with the Renault-Nissan alliance. "This could be a well-groomed match due to each having very unique skill sets," he said. OTHER NEWS & NOTES Volvo selects South Carolina for US factory Volvo confirmed this week that it will build its first US factory in South Carolina, with construction set to begin this fall. The company first revealed plans in March, though it didn't announce a site. The plant will have initial annual production of 100,000 units, though the vehicle or vehicles to be assembled were not specified. The factory, located near Charleston, will open in 2018 and ultimately employ 4,000 people. The facility will help Volvo continue its growth strategy, which includes strengthening its presence in the US market, where it wants to sell more than 100,000 cars per year. "Building a plant in the US is a reflection of Volvo Cars' commitment to the US and the key role the US plays in our growth objectives," Lex Kerssemakers, senior vice president, Americas, said in a statement. Ford GT spied on the road The 2017 Ford GT was spotted testing around the Blue Oval's headquarters in Dearborn, MI, this week. The raw body panels were exposed, and they lacked paint or camouflage. It's the first time the GT has been captured on the street after a spring of auto show reveals.