2005 Ford Taurus Se Sedan 4-door 3.0l on 2040-cars

Auto blog

Crowdsource funding push on to save historic Ford buildings

Detroit has no shortage of old, abandoned buildings, both within the city and in the surrounding communities. Few, though, have the historical significance of the old Ford Highland Park facility. Home to the very first moving assembly line, Highland Park was designed by the legendary Albert Kahn, and was one of the homes of the Model T.
Now, the Woodward Avenue Action Association is attempting to buy both the 40,000-square-foot admin building, which is located off the historic Woodward Avenue, and an 8,000-square-foot garage. The WAAA's goal is to convert the buildings into an automotive heritage center. The Detroit News spoke to the interim director of the WAAA, Deborah Schutt, who commented, "[Metro Detroit has] not been very good at telling our own story. So we've decided, let's pull everything together and tell our story."
The WAAA made an offer of $550,000 to buy the two buildings, and has $400,000 from the Michigan Department of Transportation and another $15,000 from the Michigan Economic Development Corporation. It's trying to raise a further $125,000 through crowd-sourcing, starting a campaign called "Five Dollars A Day," after old Hank Ford's $5-per-day wage for line workers.

Ford dinged by OSHA for asbestos at Buffalo plant

Ford has come under fire from the Occupational Safety and Health Administration (OSHA) for violations regarding asbestos exposure in a company metal stamping plant in Buffalo, NY. OSHA has cited Ford for eight violations in total, according to an Automotive News report, and faces fines of up to $41,800. 537 workers are employed at the stamping facility.
The violations include a pipefitter at the facility being exposed to asbestos-containing material while working on a steam line, other workers exposed to the material without respiratory protection and work areas that were not designed to limited the number of workers in contact with asbestos. Further, areas in which asbestos was present were not properly restricted, and levels of asbestos in the air were not monitored.
According to an unnamed Ford spokesperson in the AN report, the company feels that the OSHA citation is erroneous saying, "We have fully cooperated with the local OSHA officials and we don't believe the citations are warranted." Ford also maintains that it will work with the authorities to resolve the issue.

Ford to spread all-wheel drive across performance range

Car and Driver took a closer look at the all-wheel-drive system in the Focus RS, Ford reps having made "broad hints" about it being applied to other performance vehicles. One spokesperson even said that he "can see this as one of those technologies of the future." That would make sense because, as C/D notes, it couldn't have been an inexpensive job to engineer the torque-vectoring unit for the Focus – one that can send 70 percent of torque to the rear wheels, and send 100 percent of that portion to either wheel if needed. C/D also clues into the system's close similarity to the AWD unit in the recently updated Range Rover Evoque, which is manufactured by Sweden's GKN Driveline. In the Evoque, torque vectoring is brake based and two electronically controlled clutches turn the Range into a front-wheel-drive crossover under 22 miles per hour. Ford wouldn't comment on the GKN Driveline connection, or even if there is one. No matter where it might come from, more performance Fords are good for every enthusiast, and we do not look an AWD, torque-vectoring gift horse in the mouth. Featured Gallery 2016 Ford Focus RS News Source: Car and Driver Ford Technology Hatchback Performance