1950 Ford F-6 W/ Flatbed Dump on 2040-cars

Auto blog

2014 Ford Fiesta 1.0L EcoBoost to hit 45 mpg for $16,445*

When Ford first announced its plan to put the 1.0-liter EcoBoost three-cylinder engine under the hood of the 2014 Fiesta, it promised hybrid-like fuel economy without a hybrid-like premium. We're still waiting for official specs on this engine, but thanks to the EPA's fueleconomy.gov website and Ford's retail site, we now know what customers can expect in terms of both fuel economy and price.
All along, Ford has said that it expects the 1.0-liter EcoBoost to get more than 40 miles per gallon on the highway, and now the EPA backs this up with official ratings of 32 mpg in the city and 45 mpg on the highway. These numbers are an increase of two mpg city and four mpg hwy compared to the current fuel-sipping Fiesta (the 1.6 SFE), and it also beats other three-cylinder cars for highway mileage like the 2014 Mitsubishi Mirage (44 mpg highway) and 2014 Smart Fortwo (38 mpg highway); the Fiesta 1.0 EcoBoost is lower than both three-pot rivals, though, in city fuel economy with the Mitsubishi getting 37 mpg city and the Smart rated at 34 mpg city. This model handily beats high-volume small cars like the Honda Fit, Toyota Yaris and Chevy Spark in both city and highway numbers.
As for pricing, the 1.0-liter EcoBoost is offered on both the sedan and hatchback as a $995 option called the SE Manual EcoBoost package, which is aptly named since it's only offered on SE trim-level Fiestas equipped with a manual transmission. Along with the engine, the package also comes with 15-inch steel wheels, regenerative brakes and a decklid spoiler on the sedan. This means the four-door Fiesta 1.0 EcoBoost will start at $16,445*, or $17,045* for the hatchback (*not including $795 for destination).

Again? Ford issues second 2015 Fusion and Lincoln MKZ seat belt recall

In 2016, Ford issued a recall for 603,392 2013-2016 Fusions and 2013-2015 Lincoln MKZs due to potentially faulty seat belts. Apparently, that wasn't the end of it. Ford announced another recall this week for the same issue, this time covering 108,399 2015 Fusions and MKZs.  In both cases, the seat belt anchor pretensioners are the issue. According to Ford, "increased temperatures generated during deployment of the driver or front-passenger seat belt anchor pretensioner could degrade the tensile strength of the cable below the level needed to restrain an occupant." Basically, heat could weaken the seat belts, and in extreme cases, they wouldn't be able to keep up proper safety standards. Ford knows of at least one injury that has occurred due to this issue.   The recall includes 103,374 vehicles in the United States, 4,002 in Canada, and 1,023 in Mexico. Possibly affected Fusions were built at Ford's Flat Rock Assembly Plant between August 1, 2014 and January 30, 2015. The MKZs were built at the Hermosillo Assembly Plant between August 1, 2014 and November 21, 2014.  As a fix, Ford says dealers will add an extra coating to the seat belt pretensioner cable for protection from the heat. If this recall might affect your vehicle, call your local Ford dealership and use recall reference No. 19S25. This news comes after Ford recalled 1.3 million Fusions and MKZs in 2018 due to the possibility that the steering wheels could fall off. Fusions have also been recalled due to the risk of rolling away.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.