Absolutly Beautiful 1968 Ford Mustang Shelby Tribute Convertible Priced Right on 2040-cars

Auto blog

Ford Green Zone works magic with GPS to make your drive smarter, cleaner

For the most part, plug-in hybrids rely on the power stored in the battery until that charge is depleted. Unless the switch can be changed manually, it's only then that the cars fire up the internal combustion engine and begin using the fossil fuels on board. This is ideal, of course, when one's drive isn't long enough that the car needs to start sipping gasoline at all. On longer commutes, when it's certain that the route is longer than the car's all-electric range, this isn't necessarily the most efficient use of energy. Ford's Green Zone system is designed to save some of that juice for the parts of the drive that require slower speeds. Ford is working on a smart system, based on Nokia mapping technology, that uses GPS data to use both the electricity and conventional fuel more efficiently. Since battery power is less efficient at highway speeds, Ford's Green Zone system is designed to save some of that juice for the parts of the drive that require slower speeds, rather than just using up all the electrons right at the beginning of the drive. Using a website or the in-car navigation system, the driver can pinpoint the parts of the route, highlighted in green, where using battery power would be more effective, and set the car to automatically switch to electricity for those sections. Depending on the route, the car could automatically switch back and forth between the two power sources multiple times, particularly if the drive is a mix between city and highway driving. Of course, Green Zone will be go beyond that. The program is being developed to take traffic and road grade into account, details that allow the car to be make even smarter choices to improve efficiency. Ford even hopes to have Green Zone learn driver habits, and respond accordingly depending on who is driving the car. The system could control other features as well, such as anticipating corners and shifting the headlights to better illuminate the road ahead. Green Zone could also potentially use information from vehicle-to-vehicle networking to control functions in the car. The Green Zone system still has a few years before it will be ready to be put into production vehicles, but Ford is confident it will make its way onto the road eventually. As with other innovations that improve efficiency and make our vehicles smarter, we can expect to see similar technology from other manufacturers, until it becomes a regular part of driving in the future.

Recharge Wrap-up: Ford's "snowtonomous" Fusion Hybrid, Porsche eyes battery makers

Bosch and Panasonic are vying to be the battery supplier for Porsche's electric sports car based on the Mission E concept. While Bosch's costs may be higher, its solution would offer simpler logistics. Panasonic is already well established as a battery maker, providing the packs for the Porsche car's rival, Tesla. "We're in the final stage of making a decision," says Porsche CEO Oliver Blume, declining to comment on specific manufacturers. Neither Bosch nor Panasonic provided comment. Read more from Automotive News. Renault will supply a fleet of 150 Renault Zoe EVs for a smart solar charging project in Utrecht, Netherlands. The project involves the installation of 1,000 EV chargers powered by 10,000 photovoltaic panels. The Renault Zoes would be used as part of a carsharing program powered by the solar chargers. Renault and its partners will also implement a vehicle-to-grid system to provide energy during peak demand from the solar chargers and connected EVs. Read more in the press release from Renault. Ford has been testing an autonomous Fusion Hybrid prototype that is capable of driving itself in snowy conditions. Ford uses 3D mapping to scan the drive route. Its LiDAR laser mapping can even detect single falling snowflakes. It collects and processes up to 600 gigabytes of data per hour, comparing its environment to saved maps, a process that helps establish location more precisely than GPS. In addition to the LiDAR systems, the car is also equipped with cameras and radar to help it navigate. Eventually, the car could even be able to clean off its sensors when it detects loss of performance from ice and dirt. Read more in the press release below. FROM AUTONOMY TO SNOWTONOMY: HOW FORD FUSION HYBRID AUTONOMOUS RESEARCH VEHICLE CAN NAVIGATE IN WINTER DEARBORN, Mich., March 10, 2016 – Driving in snow can be a slippery challenge, with the potential for one blizzardy gust to white-out your field of view – a situation faced by the majority of people in the United States. So if self-driving cars are to become a reality – and they almost certainly will – they must be able to navigate snow-covered roads. In its quest to bring self-driving vehicles to millions of people around the world, Ford reveals six facts about its technology that allows for a car to drive itself in snow. 1. Mapping the way: Ford first creates high-resolution 3D maps using LiDAR technology to scan the area its autonomous vehicle will later drive in the snow.

Ford exec downplays idea of aluminum-intensive cars

Ford certainly made waves when it rolled out the all-new 2015 F-150 made primarily out of aluminum. But while trimming weight off its vehicles is a top priority for the Detroit automaker, we shouldn't expect the lightweight metal to be used as widely on passenger cars as it has been on its new pickup. Speaking at the Automotive News World Congress on Wednesday, top Ford exec Joe Hinrichs said that using aluminum in passenger cars isn't as beneficial as it is in trucks – primarily because the weight savings isn't as dramatic, or as deeply needed. Though improved fuel economy is certainly one advantage of aluminum construction in a truck like the F-150, low prices at the pump have prompted Ford to highlight another advantage, and that's capability: With less weight on its own, a lighter-weight truck can carry and tow more than a heavier one, because it all comes down to combined weight ratings. Ford is expected to make the new F-Series Super Duty largely out of aluminum for the same reasons, and we wouldn't be surprised to see the next Expedition use the material as well. But while certain components in Ford passenger cars will be made of aluminum, we shouldn't expect entire chassis and bodywork assemblies to use the material as extensively as on the F-150, or on more upscale passenger cars from the likes of Audi or Jaguar. Dearborn is, however, investing in other lightweight materials. It has a joint venture with Dow Chemical to put carbon fiber into mass production, much as BMW has with its i3. The Blue Oval will use a combination of carbon and aluminum on its 2017 GT supercar, and it has stripped weight by removing amenities from the 2016 Mustang GT350R, but apparently neither is a method Ford can practically apply to its volume models. Related Video: Featured Gallery 2015 Ford F-150 View 36 Photos News Source: TheDetroitBureau.com, Automotive News - sub. req.Tip: Ford Green Ford aluminum joe hinrichs