1926 Ford Model T Roadster - And Hauling Trailer - Great Condition on 2040-cars

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Do you guys like trucks?

Do you guys like trucks? If the answer is yes, boy do we have the show for you! The 2018 North American International Auto Show is lousy with 'em. Yeah, we saw the new Ram 1500, Chevy Silverado and Ford Ranger, but that's just scratching the surface. There are big trucks, little trucks, clean trucks, dirty trucks, old trucks, new trucks, red trucks, blue trucks. It's like a Dr. Seuss book. Anyway, we made a little video for you truck nuts (see what I did there?). Check it out above, and if you're looking for more serious coverage of the Detroit Auto Show, we've got it, along with a ton of images and other videos from the show floor. Enjoy! Related Video: Humor Detroit Auto Show Chevrolet Ford GMC Honda Lincoln Nissan RAM Toyota Truck Videos Original Video 2018 detroit auto show

Ford cuts 950 Russian jobs on weak demand

The Russian auto market, in decline for the past year and further hit by the declining value of the ruble and recent sanctions over its annexation of Crimea, has forced Ford to cut jobs and shifts at two of its joint venture plants there. Around 700 of the 2,700 total workers who build the Russian-market Focus and Mondeo will be cut at the plant in Vsevolozhsk, near St. Petersburg as it drops to a single production shift. A second plant about 700 miles away in Yelabuga, in the Tartarstan region, will lose 250 workers. That plant builds seven vehicles, including the Explorer, Kuga and Edge.
The Moscow Times says Ford has been especially hit by the market decline, the overall market losing 5.5 percent in 2013 compared to the year before, but Ford sales dropping 18 percent in 2013 year-on-year. This year isn't going any better, with The Blue Oval posting a 21-percent decline through the first two months of 2014. That's why, though the Yelabuga plant builds the CUVs that customers are moving into, even it is facing cuts.
The job cuts in Vsevolozhsk come on top four-week plant shutdown planned so that the paint and body shops can go to one shift. In a statement, the company said, "Ford Sollers remains absolutely committed to the Russian market and is confident it has the right product plan, people and assets to deliver long-term profitable growth."