1925 Ford Model T Touring Car on 2040-cars

Auto blog

RTR Spec 5 Concept shows off 2015 Ford Mustang's drifty potential

Meet the Ford Mustang RTR Spec 5 Concept, a fully functional drift car that, according to our team in Sin City, has been doling out demo drifts in front of the Las Vegas Convention Center.
Destined to be the flagship of RTR's Tactical Performance Line, the Spec 5 Concept is, in addition to its 5.0-liter Aluminator V8 engine, chock full of performance parts that you can buy for your very own 2015 Mustang. In addition to the Ford Racing engine, the OEM parts supplier has lent the Spec 5 an aluminum radiator and a close-ratio six-speed transmission.
ASD Motorsports provided the front lower control arms, while the car itself rides on a fully customized coilover suspension. Magnaflow and American Racing have provided the exhaust system and headers, respectively. 20-inch HRE wheels, designed for RTR, are wrapped in sticky Nitto rubber.

eBay Find of the Day: 1987 Ford Thunderbird Turbo Coupe is showroom fresh

There's an ultra-rare Ford Thunderbird for sale on eBay, although it's not quite the T-Bird you're probably thinking. This is a 1987 Thunderbird Turbo Coupe, complete with a five-speed manual transmission and just a shade over 13,000 miles on the clock. The condition is said to be mint, and judging by the interior and exterior pictures, we're inclined to believe the seller. The paint is glossy and the interior looks showroom new, while the underbody is stunningly clean for a 36-year-old car.
Underhood sits a 2.3-liter, intercooled and turbocharged four-cylinder (also found in the Mustang SVO) that was producing 190 horsepower when it left the factory. Inside, the five-speed manual transmission adds to the car's rarity. The vehicle's sole owner has been as immaculate with the paperwork as he has with the rest of the car - it's all there, including brochures and other product material.
The eBay auction ends tomorrow at midnight (9:00 PM if you're on America's west coast). Bidding has reached $10,200, and there's still plenty of time to get in on this future classic. The vehicle is located in Millstone Township, NJ.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.