Find or Sell Used Cars, Trucks, and SUVs in USA

1931 Ford Tudor Hot Rod on 2040-cars

Year:1931 Mileage:1800
Location:

Punta Gorda, Florida, United States

Punta Gorda, Florida, United States

 
*Car was designed to recreate a mid 60's Hot Rod

*Body was removed form frame and the frame was Z'd 6" and boxed with 1/4" plate steel.

*A new chrome plated I-beam front axle with Ford disc brakes was installed in front.

*Coil-over shock suspension with mustang rear axle was installed in rear.

*The complete driveline from fuel injected "88 Ford Mustang was installed in the heavily modified and reinforced frame.

*The body was stripped to bare metal. The hole in the original roof was reinforced with 1" square steel tube and covered with new sheet steel. The top was chopped 4" and was expertly blended into the rest of the body.
*The car was finished with THREE color coats and FOUR clear coats of Ford deep deep black.

*A custom dashboard of machined aluminum plate with all new instruments was installed ahead of professionally done naugahyde interior equipped with Mustang bucket seats.


For any further information, please email John @  Judith_metzler2000@yahoo.com
 


Auto Services in Florida

Workman Service Center ★★★★★

Auto Repair & Service
Address: 2947 Gulf Breeze Pkwy, Gulf-Breeze
Phone: (850) 932-3239

Wolf Towing Corp. ★★★★★

Auto Repair & Service, Towing, Transportation Services
Address: Sun-City-Center
Phone: (813) 928-9389

Wilcox & Son Automotive, LLC ★★★★★

Auto Repair & Service
Address: 62 W. Illiana Street Suite C, Windermere
Phone: (407) 440-2848

Wheaton`s Service Center ★★★★★

Auto Repair & Service, Towing, Tire Dealers
Address: Grassy-Key
Phone: (305) 451-3500

Used Car Super Market ★★★★★

Auto Repair & Service, Used Car Dealers, Wholesale Used Car Dealers
Address: 3120 W Tennessee St, Ochlockonee-Bay
Phone: (850) 575-6702

USA Auto Glass ★★★★★

Automobile Parts & Supplies, Automobile Accessories, Windshield Repair
Address: 30000 S Dixie Hwy, Sunny-Isles-Beach
Phone: (305) 247-9100

Auto blog

Ford builds one-off 50th anniversary Mustang Convertible for charity

Thu, 08 May 2014

At the New York Auto Show this year, Ford revealed a special-edition Mustang to honor the iconic pony car's 50th anniversary. Only 1,964 highly symbolic examples will be made, all of them fixed-roof coupes. But the Blue Oval automaker has just announced that it's also building a single 50 Years edition convertible that it will raffled off for charity.
The first production example of the new Mustang Convertible to roll off the line this fall, this one-off will pack many of the features on the 50 Years coupe, including its white paintjob, chrome trim, aluminum dashboard, two-tone upholstery, contrast stitching, special 19-inch wheels and special-edition badging throughout.
This unique cabrio will also be fitted with a special performance pack including Pirelli PZero rubber, Brembo brakes and a limited-slip differential to help get the 420 horsepower and 390 pound-feet of torque from the 5.0-liter V8 through the six-speed manual transmission and down to the road. It'll also feature a serial plaque with the number 0001 of 0001 and chairman Bill Ford's signature.

Ford builds Lightweight Concept with Fusion shell [w/video]

Wed, 04 Jun 2014

It's a fairly well known fact that removing weight from a car is essentially a panacea for many of the modern automobiles problems. Does it handle like crap? Remove weight. Underpowered? Don't add power; trim the fat. Need to improve fuel economy? It's diet time.
Actually executing a major weight reduction program, though, much like with human beings, is no easy task. Unlike you or I, where motivation is the issue, the prohibitive measure in trimming a car's waistline is money. Lightweight materials are expensive, with carbon fiber and carbon-fiber reinforced plastic still primarily in the domain of higher end vehicles. Even aluminum construction, pioneered on a mass-produced level by Audi and Jaguar, is only now starting to make its way into the mainstream, thanks to the upcoming Ford F-150.
With this concept, though, Ford is attempting to show that a mass-produced, lightweight vehicle isn't too far off. This is the Lightweight Concept, and while it may look like a Fusion, it weighs as much as a Fiesta. For reference, the lightest Fusion available to the public is the 3,323-pound, 2.5-liter model with a manual transmission. A manually equipped, 1.6-liter Fiesta, meanwhile, is just 2,537 pounds.

Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day

Thu, 13 Feb 2014

Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.