1931 Ford Model A Roadster Convertible All Steel Brookville Body Hot Street Rod on 2040-cars

Auto blog

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.

Ford Q1 profits dragged down by warranty costs

General Motors isn't the only Detroit automaker posting falling profits in the first quarter. Ford just released its Q1 2014 financial data, and it reported a net income of $989 million, down $622 million from Q1 2013. The drop is partially blamed on higher warranty and recall expenses than the company had anticipated.
Financially, Ford suffered a rough quarter almost across the board. Its pre-tax profit of $1.4 billion was also down $765 million from a year ago. Things were even worse in the North American market where operating profit fell significantly to $1.5 billion, down from $2.392 billion in Q1 2013. However, its global revenue ticked up slightly to $35.9 billion, from $35.6 billion in this period in 2013.
Ford admitted that it spent about $900 million on expenses that it hadn't planned for during this quarter. According to Reuters, the company paid about $400 million in additional warranty and recall costs in North America. The automaker didn't explain why the costs were so much higher than expected. However, in the last three months, Ford has had several recalls, including on the 2001-2004 Escape for rust, Explorer for its steering, Edge for its fuel line and others.