1928 Ford Roadster P/u Hot Rod, Street Rod, Rat Rod, Custom, Pro Street on 2040-cars
Columbus, Mississippi, United States
Engine:V-8
Drive Type: 2wd
Model: Model A
Mileage: 2,500
Trim: street rod
Year: 1928
1928 Ford roadster p/u. Very nice all steel body including fender and running boards. Have hood side panels and front splash apron painted to match. Hot rodz flat black paint, new red vinyl interior. Has a stock rebuilt 283 cu.in. engine with a 200R4 automatic overdrive trans., narrowed 9 " Ford rear with ladder bars and coilover shocks, Speedway dropped tube front axle with 4 bar set-up and disc brakes , rack and pinion steering, chrome tilt steering column, Weld wheels and M/T tires. A great little hot rod. Message or call with any questions. 662-328-8839 days
Ford Model A for Sale
- New built finish on 08.16.2013, 4.3l fuel injection, 700 r transmission with od(US $63,990.00)
- 1929 ford sedan ratrod 350 v8 lots of new parts new exhaust runs & looks great
- 1930 ford model a street rat rod 401 buick nailhead v8 5 speed tremec 3 dueces!!
- 1930 ford model a coupe street rod
- 1929 ford model a " hotrod" truck!!!! rare!! must see!!!!
- 1930 ford model a - three window fordor town sedan - murray body(US $18,500.00)
Auto Services in Mississippi
Unique Custom Fabrications ★★★★★
Southern Imports ★★★★★
LKQ Self Service Auto Parts ★★★★★
Delta Exhaust Systems ★★★★★
Davis Tire and Auto ★★★★★
Darrin`s Auto & Marine ★★★★★
Auto blog
Ford recalling nearly 700k Escape CUVs, C-Max hybrids over two separate safety issues
Fri, 09 May 2014Poor Escape. Ever since its launch in 2012, Ford's small CUV has been the subject of many, many, many recalls. And today, The Detroit News is reporting that Ford is adding two more recalls to the 2013-14 model year Escape's permanent record, one of them also involves the C-Max hybrid hatchback.
The first recall, covering 692,500 Escape and C-Max vehicles, is due to a software glitch that could cause the airbags - specifically, the safety canopy - to not deploy in a timely fashion during rollover crashes. According to the News, Ford says no crashes or injuries have been reported in relation to this problem.
The second recall, covering 692,700 Escapes, is related to the door handles. The News reports that the exterior door handles could open while the vehicle is in motion, and could also fail to latch properly. Once again, no crashes or injuries have occurred because of this. The National Highway Safety Traffic Administration has not issued an official notice on either recall as of this writing.
Ford recalling 390,000 cars over door latch woes
Fri, Apr 24 2015Ford is recalling certain Fiesta, Fusion and Lincoln MKZ vehicles due to faulty door latches, marking the latest in what seems to be a recurring issue for the Blue Oval. This is the third door latch recall from Ford in 2015, following a 213,000-unit recall in March and a 205,000-unit recall in January. This one, however, is significantly larger. A total of 390,000 units are affected, including Fusions and MKZs from model years 2013 and 2014, as well as Fiestas from model years 2012 to 2014. A "broken pawl spring tab" is the culprit, potentially keeping doors from latching shut. According to Ford, even if the door does shut, it could come open again without warning. The affected Fiestas were built between February 1, 2012 and May 31, 2013 at the Cuautitlan, Mexico factory. The Fusion and MKZ siblings, meanwhile, were screwed together at Hermosillo Assembly in Mexico between July 1, 2012 to May 31, 2013. Ford is aware of three minor reports of door malfunctions. In two cases, the door bounced back open, quite literally hitting drivers on their way out. In the third case, a door swung open of its own accord while a driver was attempting to park, hitting another vehicle. Ford will notify owners, who will need to report into dealers to have all four latches replaced. Scroll down for the official press release. Related Video: APR 24, 2015 | DEARBORN, MICH. FORD MOTOR COMPANY ISSUES SAFETY RECALL IN NORTH AMERICA FOR DOOR LATCH ISSUE ON FORD FIESTA AND FUSION, LINCOLN MKZ Ford Motor Company is issuing a safety recall for approximately 390,000 2012-2014 Ford Fiesta and 2013-2014 Ford Fusion and Lincoln MKZ vehicles for a door latch issue. The door latch in these vehicles may experience a broken pawl spring tab, which typically results in a condition where the door will not latch. If a customer is then able to latch the door, there is potential the door may unlatch while driving, increasing the risk of injury. Ford is aware of two allegations of soreness resulting from an unlatched door bouncing back when the customer attempted to close it, and one accident allegation when an unlatched door swung open and struck an adjacent vehicle as the driver was pulling into a parking space. Affected vehicles include certain 2012-2014 Ford Fiesta vehicles built at Cuautitlan Assembly Plant, Feb.
Automakers' rush on aluminum may result in shortage
Thu, 13 Feb 2014Aluminum is the new buzzword in the automotive industry. The latest Range Rover and Range Rover Sport both take advantage of the lightweight material to shave huge amounts of body fat (only it's called "aluminium" over there). Audi and Jaguar have been using the stuff for years in their A8 and XJ, respectively, and now, aluminum is going mainstream, arriving on the 2015 Ford F-150.
While we're excited to see aluminum make an impact outside the premium market, its widespread adoption apparently won't come without some problems, notably in terms of supply. "There isn't an automotive manufacturer that makes vehicles in North America that we're not talking to," Tom Boney, of Novelis, the largest global supplier of aluminum sheetmetal, told The Detroit News.
According to Boney, Ford's use of aluminum on such a large scale has forced auto manufacturers in "every boardroom" to reconsider their plans following the F-150's unveiling, for one simple reason: there's not exactly enough aluminum to go around, at least in the short term. The auto industry presently only accounts for six percent of the aluminum sheet produced, but as the material is adopted by more and more brands, that figure is expected to swell to 25 percent within the next six years.