1928 Ford Model A Roadster Pickup on 2040-cars

Auto blog

Ford opens the doors on its Swedish rally skunkworks

It's always amazing to see how different kinds of racecars are made. Formula One racers are often constructed in modern architectural marvels that hint at some of the cutting-edge technology going into the racing. Conversely, rallying is all about sliding around on a varied course as fast as possible, but it often leaves a vehicle caked in mud. So it makes some sense Olsbergs MSE, or simply (OMSE) rally car shop in Nynashamn, Sweden, shows technological sophistication in a more down-to-earth setting. It builds Ford Fiesta ST racers for Global Rallycross there, and this new video gives viewers a tour through the work.
Former rally driver Andreas Eriksson runs OMSE. These days instead of racing, he and the company's 46 employees are building Ford racers from scratch. A ton of work goes into constructing each one, and according to Eriksson, it takes 400 hours to complete each body. At times, things are so busy that some of the technicians live in the shop in apartments that are on premises. There's even a restaurant to keep them fed. Sadly the dyno room is empty during this visit, though.
By the time OMSE is done, a rallycross car might resemble a Fiesta ST on the outside, but as you see in the video, it's a completely different beast underneath. Check out the work it takes to build one of them, and scroll down to read more about it in the official release.

2018 Ford Expedition spied looking stylish

The Ford Expedition and Lincoln Navigator got a cool reception for their 2015 warmed-over redesign. But with big, high-riding vehicles once again in vogue, Ford is pushing ahead with a ground-up redesign of its biggest SUVs. Based on these spy shots, the Expedition will continue to serve as the Navigator's more affordable twin. Yes, that's a bold prediction, considering we still haven't spotted Lincoln testing the new Navigator, but study the greenhouses on this Expedition prototype and the Navigator Concept from New York – from the arrow-straight belt line to the extra-long rear window to the aggressively raked windshield, this Expedition's overall profile is broadly similar to what Lincoln previewed earlier this year. While our spies claim the new Expedition will look to the F-150 for design inspiration, we see a departure from past Expedition tradition. Unlike the supposed Expedition spy shots we showed you nearly a year ago – which was nothing more than an SUV with an F-150's nose grafted on, this prototype's front-end styling looks softer and more aerodynamic, with a smaller grille and headlights, almost like an Escape or Edge. This kind of change would explain the additional front-end camouflage. In back, our spies rightly point out that Ford fitted a faux rear end to disguise the rear window's rake – expect the real thing to feature the angled rear window previewed on the Navigator Concept. Look at the last image in the gallery for a better idea of how the Expedition's rear window will actually look. We can't say a lot about the taillights, because of the camo, but non-LED taillights are present. We'd expect Ford to offer LEDs on higher trim levels. While the F-150's styling might not make the transition to the Expedition, its powertrains and emphasis on lightweight aluminum will. Our spies report the biggest SUV will ride on a new T3 platform and feature an aluminum body, with the F-150's 3.5-liter EcoBoost V6. Expect a ten-speed automatic transmission and start/stop tech for sure, while the smaller 2.7-liter, twin-turbo V6 could slot in as the Expedition's base engine – we're less sure on that one. And we're even more uncertain of the rumors of an Expedition Hybrid. Our spies report it could mate a 3.5-liter V6 with an electric motor(s) and battery packs for a more economical full-size SUV. Expect to see the 2018 Expedition debut in January, at the 2017 Detroit Auto Show.

Black Zombie electric Mustang launches Blood Shed Motors [w/videos]

As patient zero of Blood Shed Motors, the classic pony car has received a powerful electric transplant. Lightning repeatedly vanquished the darkness like the angriest of strobe lights and thunder shook the building, punctuating the clatter of a heavy Texas rain on the metal roof as the clock ticked away the initial seconds of a rare full moon Friday the 13th. It was then that the Black Zombie came to life for the first time. Beneath the hood of this rust-free 1968 Mustang fastback, a 289-cubic-inch V8 no longer turns gasoline into heat, noise and pollution. As patient zero of Blood Shed Motors, the classic pony car has received a powerful electric transplant, and now boasts twinned Warp 11 DC motors and a pair of fresh Zilla controllers that will serve as the basic blueprint for future vehicles. Dubbed the Zombie 222 drivetrain, the setup will be limited to 750 horsepower in customer's cars to keep the maintenance experience low, and eventually will draw power from a 40-kWh battery pack. In this first example, though, the output is bit more extreme. For one day, at least, they have the 1,500-kW-capable pack that powers the record-setting Swamp Rat 37 racer belonging to Don Garlits and a brief window of opportunity to try it out on a track. Blood Shed Motors is the result of a collaboration between NEDRA co-founder John "Plasma Boy" Wayland, the man who helped bring electric vehicle drag racing to the attention of the world with his unassuming White Zombie Datsun 1200 conversion and Austin, TX business man Mitch Medford, who've put together a small team of experts in their chosen fields. The plan is to build a limited number of muscle car conversions on pristine early Mustang, Camaro, and Barracuda platforms. The plan is to build a limited number of high-quality muscle car conversions on pristine (No restored rust buckets!) early Mustang, Camaro, and Barracuda platforms. Each can be customized according to buyer's wishes and blessed with its own serial number. The price tags will be in the eye-watering $200,000-and-up neighborhood, reflective of the cost and rarity of these cars and the custom nature of the alterations. Of course, you can't just multiply horsepower and add the monster torque that these electric motors put out and expect an antique chassis to hold up.