2012 Ford Focus Sel on 2040-cars

Auto blog

Ford F-Series Super Duty prototype reduced to smoldering mess of aluminum and steel [UPDATE]

The most important bit of information you need to know after looking through our high-res gallery of images depicting a prototype 2016 Ford F-Series Super Duty pickup truck burning to the ground is that nobody was hurt. There were two engineers inside the vehicle when it caught fire, and both exited to safety.
That's the good news. The bad news is that the truck, which appears to have been testing in Death Valley, appears to be a total loss, minus, of course, whatever information Ford can glean from the conflagration - particularly tracing it back to its root cause. Besides that, we're also expecting the body of the next Super Duty to be hewn from aluminum, as is the case with its smaller brother, the brand-new F-150. Note the little aluminum droppings littering the roadway as apparent proof of that.
Our spy photographers report that it took just 21 minutes for the F-Series Super Duty to burn completely to the ground. The fire appears to have started in the driver-side front wheel well, spreading to engulf the entire front end in three minutes. We can't confirm the source of the blaze, but we're curious if the car's black vinyl cladding, meant to obscure the secrets within, contributed to the fire.

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.

Marchionne open to combination with Ford or GM

At the depths of the auto industry implosion, there was widely reported talk that General Motors and Chrysler would be merged into a mighty import-beating behemoth. While such notions clearly never materialized, that doesn't mean the idea is dead. In fact, FCA boss Sergio Marchionne still welcomes the idea of a partnership with either GM or Ford. He responded positively to the idea, calling it "technically feasible," when asked about it at the 2015 Geneva Motor Show, Automotive News reports. "There's bantering that goes on all the time," Marchionne told AN, before quashing suspicions that a plan was in the works by adding that "nothing substantive" was going on. Our favorite black sweater enthusiast isn't quite as interested in the idea of teaming with a foreign manufacturer like PSA Peugeot Citroen, or in the rumored tie-up with Volkswagen, though. That is a shame, particularly in regards to Marchionne's shut down of a partnership with the French, although it isn't necessarily surprising – FCA already consists of eight automakers, and as Sergio told AN, there's really nothing at PSA that could help the company out. What are your thoughts? Is there an obvious project or segment that would benefit from an FCA partnership with Ford or GM? Have your say in Comments. News Source: Automotive News - sub. req.Image Credit: Marco Bertorello / AFP / Getty Images Chrysler Fiat Ford GM Sergio Marchionne FCA merger