2013 Ford Fiesta Se Automatic Sync Alloys One Owner 27k Texas Direct Auto on 2040-cars

Auto blog

Ford recalls Explorer and Lincoln MKC for fire hazard

The Basics: Ford will recall 5,536 examples of the 2016 Explorer and 2015-2016 Lincoln MKC. The Explorers have build dates between October 20, 2014, and January 28, 2016, at the Chicago Assembly Plant. The MKCs are from between November 25, 2013, and January 25, 2016, at the Louisville Assembly Plant. In total, there are 3,129 total affected examples of the 2015-2016 Lincoln MKC and 2,407 examples of the 2016 Ford Explorer. Of these, 1,543 are in the US and 3,993 are in Canada. The Problem: The combination of the engine block design and the block heater in these vehicles can cause the part to overheat when plugged in. Injuries/Deaths: None reported, but there are two cases of underhood fires in Canada. If you own one: Ford will begin notifying owners during the week of May 16, company spokesperson John Cangany tells Autoblog. Related Video: Ford issues safety recall for certain 2015-2016 Lincoln MKC and 2016 Ford Explorer vehicles to replace engine block heaters Ford is issuing a safety recall for approximately 5,500 2015-2016 Lincoln MKC and 2016 Ford Explorer vehicles to remove the heaters and replace them with an updated design. The engine block design, coupled with the particular block heater installed in these vehicles, causes the unit to be susceptible to overheating when the vehicle is parked and the block heater is plugged in –increasing the risk of an underhood fire. Ford is aware of two reports of underhood fires in Canada, but is not aware of any accidents or injuries related to this issue. Affected vehicles include certain 2015-2016 Lincoln MKC vehicles built at Louisville Assembly Plant, Nov. 25, 2013 through Jan. 25, 2016 and certain 2016 Ford Explorer vehicles built at Chicago Assembly Plant, Oct. 20, 2014 through Jan. 28, 2016. There are 5,536 vehicles affected by the issue, including 3,129 2015-2016 Lincoln MKC and 2,407 2016 Ford Explorer vehicles, with 1,543 of the affected vehicles in the United States and federalized territories and 3,993 in Canada. Dealers will remove and replace the engine block heater with an updated design and, if needed, replace the cord at no cost to the customer.

Ford Mustang GT350R adds a lot more than just a new letter [w/videos]

Okay Chevrolet, the ball is in your court. Ford served up one hell of a rebuttal to the track-focused Camaro Z/28, introducing the limited-production Mustang GT350R, complete with over 500 horsepower, over 400 pound-feet of torque and freaking carbon-fiber wheels. Carbon-fiber wheels. Seriously. It's because of those 19-inch hoops, along with some other changes, that Ford was able to slice 130 pounds from the already lightweight GT350 Track Pack. The wheels are responsible for a 13-pound reduction in unsprung weight per corner, while the removal of such superfluous things like the air conditioning, stereo, rear seats, trunk carpet, backup camera and tire inflator accounts for the rest of the weight reduction. Along with the lower weight, Ford has thoroughly reworked the GT350's aerodynamics, adding a simply monstrous rear wing and diffuser, along with vented wheel wells, a new hood vent that both extracts heat and reduces lift. Beside the aero aids, Ford has shod the carbon-fiber wheels in ultra-grippy Michelin Pilot Sport Cup 2 tires, just to guarantee the shiny side remains up. View 21 Photos Ford retained the standard GT350's 5.2-liter, flat-pane V8, Torsen limited-slip differential (complete with a 3.73 rear axle ratio), although as power figures haven't been published for the standard car, there's no way to know whether the GT350R received a power bump. What we do know, though, is that the GT350R will not be limited to the track. While that's certainly its natural habitat, owners will be able to register and drive this monster on public roads. Take a look at the official press release on the GT350R, available below. And also be sure to have a peek at both Ford's stock photos of the new car, as well as our full gallery of live images, direct from the Blue Oval's Detroit Auto Show press conference home at Joe Louis Arena. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]

It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.