2003 Ford F-550 on 2040-cars

Auto blog

Ward's calls out Ford's EcoBoost engines for their crummy fuel economy

With a name like EcoBoost, one might expect Ford's line of turbocharged engines to be somewhat, um, economical. In other words, replacing displacement with a turbocharger is supposed to deliver better fuel economy. Based on the experience time and time again of multiple Autoblog editors, your author included, this is simply not the case. Now, Ward's is calling out the cruddy efficiency numbers of Ford's EcoBoost line of engines. The column dresses down not just the new 2.7-liter V6 of the 2015 F-150, but also the 2.3-liter of the Mustang, the 1.5-liter from the Fusion and the 3.2-liter PowerStroke diesel found in the Transit, while also explaining why just one Ford engine was named to Ward's 10 Best Engines list. In its testing of all four engines, Ward's editors never came even remotely close to matching the 2.7's claimed 26 miles per gallon (for two-wheel-drive models), with the truck's computer indicating between 17.6 and 19 mpg over a 250-odd-mile run. Calculating the fuel economy manually revealed an even more depressing 15.6 miles per gallon. Criticisms with the 2.3-liter four-cylinder focused on its strange soundtrack, although it was business as usual with the 1.5-liter and 3.2 diesel, with Ward's criticizing the fuel economy of both engines. The 1.5, which Ward's claims is sold as a hybrid alternative, failed to get over 30 miles per gallon, while the five-cylinder turbodiesel's figures couldn't stand up against FCA's 3.0-liter EcoDiesel. The entire column really is worth a read, especially if you were disappointed in Ward's decision to only salute Ford's three-cylinder EcoBoost while shunning the rest of the company's new turbocharged mills.

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Next-gen Ford Taurus spotted in China

We're getting our first look at the next-generation Ford Taurus thanks to some spy shooters in China. While the camouflage and angle of the photo keep changes to the body a secret, there's no hiding the massive hexagonal, chrome grille up front. It lends a look very similar to the Fusion. Beyond the eye-grabbing grille, the headlights are reshaped, but are still quite squinty. There's also a new lower air dam that runs the width of the front with LEDs at the top corners. The hexagonal grille fits the design of the Fusion well, but this single image makes it look a little too big and disproportionate for the fullsize Ford sedan. Maybe the integration works better from a different angle, though. The next-gen Taurus is rumored debut for the 2016 model year and reportedly rides on a stretched and widened version of the Fusion's platform. Ford's big goal for the new model is allegedly to shed as many pounds from the scales as possible. The sedan also may get a nine-speed automatic to boost fuel economy. The engine range is still a mystery, but EcoBoost options are practically a sure thing, possibly even making up the whole model lineup.