2014 Lariat New Turbo 6.7l V8 32v Automatic 4wd Pickup Truck Premium on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Ford opens the doors on its Swedish rally skunkworks

It's always amazing to see how different kinds of racecars are made. Formula One racers are often constructed in modern architectural marvels that hint at some of the cutting-edge technology going into the racing. Conversely, rallying is all about sliding around on a varied course as fast as possible, but it often leaves a vehicle caked in mud. So it makes some sense Olsbergs MSE, or simply (OMSE) rally car shop in Nynashamn, Sweden, shows technological sophistication in a more down-to-earth setting. It builds Ford Fiesta ST racers for Global Rallycross there, and this new video gives viewers a tour through the work.
Former rally driver Andreas Eriksson runs OMSE. These days instead of racing, he and the company's 46 employees are building Ford racers from scratch. A ton of work goes into constructing each one, and according to Eriksson, it takes 400 hours to complete each body. At times, things are so busy that some of the technicians live in the shop in apartments that are on premises. There's even a restaurant to keep them fed. Sadly the dyno room is empty during this visit, though.
By the time OMSE is done, a rallycross car might resemble a Fiesta ST on the outside, but as you see in the video, it's a completely different beast underneath. Check out the work it takes to build one of them, and scroll down to read more about it in the official release.

Crowdsource funding push on to save historic Ford buildings

Detroit has no shortage of old, abandoned buildings, both within the city and in the surrounding communities. Few, though, have the historical significance of the old Ford Highland Park facility. Home to the very first moving assembly line, Highland Park was designed by the legendary Albert Kahn, and was one of the homes of the Model T.
Now, the Woodward Avenue Action Association is attempting to buy both the 40,000-square-foot admin building, which is located off the historic Woodward Avenue, and an 8,000-square-foot garage. The WAAA's goal is to convert the buildings into an automotive heritage center. The Detroit News spoke to the interim director of the WAAA, Deborah Schutt, who commented, "[Metro Detroit has] not been very good at telling our own story. So we've decided, let's pull everything together and tell our story."
The WAAA made an offer of $550,000 to buy the two buildings, and has $400,000 from the Michigan Department of Transportation and another $15,000 from the Michigan Economic Development Corporation. It's trying to raise a further $125,000 through crowd-sourcing, starting a campaign called "Five Dollars A Day," after old Hank Ford's $5-per-day wage for line workers.