2010 Ford F-350 King Ranch Crew 4x4 Off-road Diesel 21k Texas Direct Auto on 2040-cars

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Ford Shelby GT350 Mustang is a lean, mean, Z/28-fighting machine [w/video]

If there's one thing you can count on, it's that the renewed rivalry between the Ford Mustang and Chevrolet Camaro will never, ever cease. For every version of Ford's pony car, there's an equally potent Chevrolet. And so with the debut of the Camaro Z/28 earlier this year, Ford has responded with a track-focused 'Stang of its own, resurrecting the Shelby GT350 name.
It looks to be a fine piece of work, this Mustang, with power coming from a naturally aspirated 5.2-liter V8 that will produce "more than 500 horsepower" and "above 400" pound-feet of torque. That grunt runs to the rear wheels via a six-speed manual transmission, and a Torsen limited-slip differential keeps everything in line.
But that's hardly the most impressive piece of the GT350 puzzle. Ford has increased the Mustang GT's chassis stiffness for duty here in the Shelby, and the coupe employs MagneRide damping which automatically adjusts based on road conditions and driver inputs. It's a first both for the Blue Oval and for the segment. And speaking of firsts, the GT350 uses a flat-plane crankshaft - something Ford has never included in a production V8 before.

Holy crime-fighting Ford F-150, Batman!

What would Batman drive for his weekly trips to Home Depot for the bits and pieces needed to keep his lair deep below Wayne Manor in tip-top condition? Certainly not the Batmobile - there's no way a 4x8 sheet of plywood will fit between the wheel wells, not to mention the fact that jet turbine engines have an unfortunate tendency to set trailers on fire when towing...
No, what Batman needs is a pickup truck. The boys from Ford teamed up with Galpin Auto Sports to build just such a machine, and it has just debuted at Comic Con. Designed by Jared Barris, grandson of the legendary kustomizer George Barris, the 2012 F-150 pickup you see here, dubbed Crime Fighter, is painted Tuxedo Black with Ferrari Red highlights and is affixed with fins on each side of the truck bed. It's nothing if not unique.
Well, it's at least unique for now. According to Ford, Galpin in Southern California is willing to take orders for customers looking to don a cape and hit the town for a night of crime-fighting action. Or trips to Home Depot. Check out our high-res image gallery and then scroll down for the official description from Ford. We're waiting for details such as pricing and build time from Ford, and we'll update this post if and when we hear back.