Lifted F-250 Superduty on 2040-cars

Auto blog

2015 Ford F-150 to get up to 26 miles per gallon

The 2015 Ford F-150 is one of the most important US vehicle debuts in years, be it in the pickup segment or the entire marketplace. While we've already known about the truck's engine lineup, its payload ratings and we've even learned a bit about how it drives, the truck's EPA-estimated fuel economy ratings have remained a mystery. The wait is finally over. Ford has announced numbers that put the latest F-150 as the mileage leader among gasoline-powered, full-size pickups in the US, with its new 2.7-liter EcoBoost V6 topping the charts. Starting with the entry-level naturally aspirated 3.5-liter V6, the rear-wheel-drive F-150 is rated at 18-miles-per-gallon city, 25-mpg highway and 20-mpg combined. Opting for four-wheel drive drops those numbers slightly to 17/23/19. If fuel economy is your absolute priority, then upgrading to the 2.7-liter EcoBoost V6 is the hot ticket. It improves things further to 19/26/22 in rear-wheel drive trim or 18/23/20 with four-wheel drive. The carryover naturally aspirated 5.0-liter V8 is rated at 15/22/18 as a 4X2 or 15/21/17 as a 4X4. Finally, the flagship 3.5-liter EcoBoost V6 tops the range in available torque and offers buyers 17/24/20 ratings with rear-wheel drive or 17/23/19 with four-wheel drive. "We are delivering with the toughest, smartest and most capable F-150 ever – and now the highest EPA-estimated fuel economy ratings of any full-size gas-powered pickup in America," said Raj Nair, Ford group vice president, Global Product Development, in the company's announcement. Depending on engine and drivetrain configuration, Ford contends that the 2.7-liter EcoBoost's top rating puts fuel economy up between 5 and 29 percent over the current generation, thanks in large part to the truck's lighter aluminum construction. Obviously, these are EPA estimates, and your mileage may vary – ours has. Recently, Autoblog team members have had real difficulty even approximating government mpg estimates on many EcoBoost models, including the new F-150. Scroll down to read Ford's full announcement, including comparisons to rival models.

Ford Mustang Shelby GT500 has a bit of a dyno issue

We're of the mind that each and every dyno should come with Murphy's Law painted in big, visible letters down the side. For every ten successful dyno runs out there, it seems there's one where events to horribly wrong. Take, for example, the video below. The clip shows what happens when a Ford Shelby GT500 and a mobile dyno have a bit of a disagreement at the Performance Expo 24 in Sherbrooke, Quebec. We won't spoil the results for you, but we will say there's some substantial carnage involved.
It's unclear just how much damage ensues from the dust up or whether anyone was harmed in the incident, but from the looks of things, everyone made it out without serious injury. If only we could say the same for the machines involved. Check out the video below.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.