F 250 4x4 Diesel With Snow Plow, Low Miles 63,865. 7.3 Power Stroke Tow Package. on 2040-cars

Auto blog

NHTSA advances investigation of Ford Crown Victoria headlights

The National Highway Traffic Safety Administration is opening a preliminary evaluation into reports of suddenly failing headlights on 517,945 examples of the 2003-2005 Ford Crown Victoria and Mercury Grand Marquis. The government started looking into this problem in April when the North Carolina Consumers Council filed a defect petition with the agency. Now, the inquiry has moved to the next step. According to NHTSA's documentation (as a PDF), it examined its own database and worked with Ford to come up with a total of 3,609 complaints of the front lighting control module suddenly failing. When this happens, drivers lose the low-beam headlights, but the high-beams can be used by holding the stalk. Sometimes turning the switch off and on fixes the issue. Additionally, there are 15 allegations of crashes, and one reported shoulder injury. NHTSA's preliminary evaluations "evaluate the scope, frequency, and consequence of the alleged defect" and don't necessarily lead to a recall. NHTSA looked into this problem once before in 2008 and 2009 and decided that a recall wasn't necessary. Ford also extended the warranty on the front lighting control module for these vehicles. INVESTIGATION Subject : Loss of headlights Date Investigation Opened: AUG 10, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15028 Component(s): EXTERIOR LIGHTING All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD CROWN VICTORIA 2003-2005 MERCURY GRAND MARQUIS 2003-2005 Details Manufacturer: Ford Motor Company SUMMARY: After receiving a defect petition (DP15002) concerning the loss of headlights and other exterior lighting in model year (MY) 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles, the Office of Defects Investigation (ODI) analyzed Vehicle Owner Questionnaire (VOQ) complaints received from consumers and identified a total of 605 reports (for all submission dates) alleging headlight failure. The complaints indicate failures of both low beam headlights typically while driving, a defect condition that was evaluated under a prior ODI investigation (PE08066). Most consumer VOQs indicate that the headlights failed suddenly and without warning leaving the driver with no forward lighting, however some report the headlights flickered or dimmed prior to turning off. In some cases drivers were able to turn the headlights back on after a period of time while others reported the headlights would not come back on at all.

Ford F-100 'Snakebit' shown off by Gene Simmons and Shannon Tweed at SEMA

Ford, along with KISS bassist Gene Simmons and his wife, Shannon Tweed, used SEMA as a backdrop to pull the covers off Snakebit, a 1956 Ford F-100 pickup truck that's been updated with Shelby Mustang-derived styling bits and a 5.4-liter supercharged V8 engine. All 550 horsepower are funneled through a six-speed manual gearbox to the rear wheels.
Underneath the custom bodywork sits a chassis that's been stretched five inches and a bed widened and bedecked with billet machined pieces that are supposed to look like wood. The 20-inch rear and 18-inch front wheels ape those of past Shelby Mustang models. The interior is swathed in two-tone leather with a bench seat designed to look - try to act surprised - like a Shelby Mustang.
Like what you see? Bidding for the truck will take place in 2014 at an unspecified Barrett-Jackson event (we'd assume Scottsdale). Proceeds will be used to help build a children's hospital in Saskatoon, in the province of Saskatchewan, where Ms. Tweed grew up. See the high-res gallery above and the press release down below for more.

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.