2015 Ford F250 Xl on 2040-cars

Auto blog

Ford recalling 390,000 cars over door latch woes

Ford is recalling certain Fiesta, Fusion and Lincoln MKZ vehicles due to faulty door latches, marking the latest in what seems to be a recurring issue for the Blue Oval. This is the third door latch recall from Ford in 2015, following a 213,000-unit recall in March and a 205,000-unit recall in January. This one, however, is significantly larger. A total of 390,000 units are affected, including Fusions and MKZs from model years 2013 and 2014, as well as Fiestas from model years 2012 to 2014. A "broken pawl spring tab" is the culprit, potentially keeping doors from latching shut. According to Ford, even if the door does shut, it could come open again without warning. The affected Fiestas were built between February 1, 2012 and May 31, 2013 at the Cuautitlan, Mexico factory. The Fusion and MKZ siblings, meanwhile, were screwed together at Hermosillo Assembly in Mexico between July 1, 2012 to May 31, 2013. Ford is aware of three minor reports of door malfunctions. In two cases, the door bounced back open, quite literally hitting drivers on their way out. In the third case, a door swung open of its own accord while a driver was attempting to park, hitting another vehicle. Ford will notify owners, who will need to report into dealers to have all four latches replaced. Scroll down for the official press release. Related Video: APR 24, 2015 | DEARBORN, MICH. FORD MOTOR COMPANY ISSUES SAFETY RECALL IN NORTH AMERICA FOR DOOR LATCH ISSUE ON FORD FIESTA AND FUSION, LINCOLN MKZ Ford Motor Company is issuing a safety recall for approximately 390,000 2012-2014 Ford Fiesta and 2013-2014 Ford Fusion and Lincoln MKZ vehicles for a door latch issue. The door latch in these vehicles may experience a broken pawl spring tab, which typically results in a condition where the door will not latch. If a customer is then able to latch the door, there is potential the door may unlatch while driving, increasing the risk of injury. Ford is aware of two allegations of soreness resulting from an unlatched door bouncing back when the customer attempted to close it, and one accident allegation when an unlatched door swung open and struck an adjacent vehicle as the driver was pulling into a parking space. Affected vehicles include certain 2012-2014 Ford Fiesta vehicles built at Cuautitlan Assembly Plant, Feb.

Mustang parts under the new Lincoln Aviator mean good things for Ford

NEW YORK — As we mentioned last night, underneath the new Lincoln Aviator "concept" there appears to be an independent rear suspension lifted right from the Ford Mustang parts bin. And while it's pretty cool on its face that Mustang rear-drive platform bits are being reused in the broader Ford universe, what this means for the next Explorer could be really cool. A quick caveat: The Aviator here in New York is very close to the production version, but it's not technically a production car. It looks hand-built, with temporary exhaust and some show-car touches. The suspension underneath looks exactly like a Mustang's, but the actual production Aviator will almost certainly use beefier components with the same basic design and geometry, since the Aviator will be much heavier than the smaller Mustang. That being said, we're fairly confident that even at this early stage, the Mustang-derived suspension seen in New York is a preview of what'll be under the production Aviator. Furthermore, Ford won't say it, but based on what we're seeing on Aviator, it's a safe bet that Ford will utilize the Aviator platform for the next Explorer. That would enable the economies of scale necessary to produce a brand new rear-drive-based SUV platform in the first place. It also means that the Explorer should be available without AWD — and given the stable of powerful EcoBoost engines, and the competent 10-speed automatic in the parts bin, a rear-drive Explorer has a shot at being a decent driver. Aviator wouldn't go rear-drive-based if driving dynamics weren't important; Explorer should inherit these priorities. More evidence: The Explorer spy shots we saw back in February sure share the Aviator's general proportions. Even back then, before Aviator was revealed, we were hypothesizing that an EcoBoost 3.5-liter-powered version could boast as much as 400 horsepower, if the Expedition's tune were adopted. Suddenly, the Explorer seems very interesting. So, an EcoBoost, rear-drive Explorer sure sounds like something Ford Performance would be interested in, right? We knew an Explorer ST is coming, but with 365-400 horsepower potential and a chassis designed with dynamics in mind, it doesn't seem like as much of a stretch as the Edge ST. And a performance-oriented AWD system is a possibility, too. That's an area where Ford has been gathering experience at a rapid pace. What do we not expect from a new Explorer? A V8.

Watch how a Ford Raptor rolls down the assembly line in Dearborn

Bloomberg TV reporter Matt Miller is the proud new owner of a pretty killer truck. How do we know? The reporter headed to Dearborn, MI to Ford's assembly plant, with a film crew in tow, to see exactly how his new F-150 SVT Raptor and its mother-loving 6.2-liter V8 engine, was screwed together.
The resulting video does an excellent job of summing up how an assemblage of parts and pieces is turned into a triple-black Raptor, thanks to the work of some 1,000 employees and about 20 hours of real time. Click through below to see how the truck is born, with a surprise cameo playing the part of delivery driver at the end.