2008 Ford F250 on 2040-cars

Auto blog

Ford recalls 1.48 million F-150s for transmission, plus other models

Weeks after recalling more than 800,000 F-Series pickup trucks for a fire risk, Ford has issued another separate recall for approximately 1.48 million 2011-2013 F-150s for a transmission fault. The six-speed automatics could unexpectedly downshift into first gear without warning. Ford and Lincoln tangentially issued much smaller recalls for the Mustang, Continental, Nautilus, and Navigator. According to Ford, some 2011-2013 model year F-150 pickups with six-speed automatic transmissions could "experience an intermittent loss of the transmission output speed sensor signal to the powertrain control module." This could potentially cause the trucks to temporarily downshift, which could be dangerous if it occurs while driving. Of the 1.48 million affected trucks, 1.26 million are in the U.S. while 221,000 are in Canada. Thus far, Ford knows of five reported accidents involving the issue. To remedy the problem, owners can take their trucks to dealers to update the power control module software. Ford also issued recalls for about 4,350 2019 Mustangs, Lincoln Nautiluses, and Lincoln Navigators in the U.S. and Canada due to a possible fault with the instrument clusters. Although there have been no reports of accidents, Ford says the instrument panel clusters assemblies might be blank or not turn out when the vehicle is started. Additionally, Ford issued a third recall for 28,200 2017-2019 Lincoln Continentals in the U.S. and Canada. Ford says silicon contamination might build up inside the door latch motor, causing it to malfunction. As a result, the door latch might not always fully engage, and the doors could possibly open unexpectedly. Despite no reports of accidents, Ford will remove and replace door latch assemblies on all doors for those affected by the defect. If any of these apply to a vehicle you own, contact Ford to discuss whether it is included in any of these recalls and have the vehicle checked out at a Ford dealership.

This is what a 3D-printed liquid metal Ford Torino looks like

Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.

eBay Find Of The Day: 1988 Saleen Ford Mustang General Tire 21R race car

Saleen may be making headlines these days for working on the Tesla Model S, but its history and bread-and-butter is all about the Ford Mustang. The rear-wheel-drive Dearborn pony cars singlehandedly put the company on the map in the '80s. Founder Steve Saleen was already a talented American racing driver when he started the venture, and like many auto industry businesses before him, Saleen went to the track to prove his vehicles' worth. Now, there's a chance to buy one of those early racers on eBay Motors.
Saleen Mustangs raced in the Sports Car Club of America Escort Endurance Championship - a series of multi-hour races meant to challenge man and machine. Ostensibly a showroom stock class, the cars had larger wheels, tuned suspensions and other upgrades that stretched the concept slightly. Saleen found major success though, taking the championship for its class in 1987 and winning the 24 Hours of Mosport consecutively from 1986 through 1988.
According to the seller, Saleen only built eight of these cars, and this one carries the #21R serial number. They all started life as new Mustangs from Ford dealers but were immediately stripped and prepped to go racing. Beyond obvious mods like a roll cage, they featured eight-inch wide wheels in front, an inch of additional track width, stiffer suspension bushings and much more.