2017 Ford F-150 on 2040-cars

Auto blog

Ford Shelby GT350 Mustang is a lean, mean, Z/28-fighting machine [w/video]

If there's one thing you can count on, it's that the renewed rivalry between the Ford Mustang and Chevrolet Camaro will never, ever cease. For every version of Ford's pony car, there's an equally potent Chevrolet. And so with the debut of the Camaro Z/28 earlier this year, Ford has responded with a track-focused 'Stang of its own, resurrecting the Shelby GT350 name.
It looks to be a fine piece of work, this Mustang, with power coming from a naturally aspirated 5.2-liter V8 that will produce "more than 500 horsepower" and "above 400" pound-feet of torque. That grunt runs to the rear wheels via a six-speed manual transmission, and a Torsen limited-slip differential keeps everything in line.
But that's hardly the most impressive piece of the GT350 puzzle. Ford has increased the Mustang GT's chassis stiffness for duty here in the Shelby, and the coupe employs MagneRide damping which automatically adjusts based on road conditions and driver inputs. It's a first both for the Blue Oval and for the segment. And speaking of firsts, the GT350 uses a flat-plane crankshaft - something Ford has never included in a production V8 before.

NHTSA closes Ford F-Series Super Duty steering probe without recall

The National Highway Traffic Safety Administration's investigation into 2008 Ford F-250 and F-350 Super Duty pickups, which was originally opened last year, has now ended without a recall. NHTSA was looking into steering failures on some 336,000 trucks.
The issue rested with the steering gear - NHTSA received five complaints of failures - which was redesigned in 2005. According to the report on the matter, investigators "found evidence of broken sector shaft gear teeth and piston damage consistent with incidents of single event overload."
NHTSA investigators, however, "found no evidence of fatigue or material property defects in any of the fractures. Analysis of complaint rates by vehicle build month showed no patterns indicating potential manufacturing quality issues and no difference before and after Ford introduced design changes to the input shaft and sector shaft seals in July 2007 to address potential leak concerns," according to the report, obtained by The Detroit News.

Again? Ford issues second 2015 Fusion and Lincoln MKZ seat belt recall

In 2016, Ford issued a recall for 603,392 2013-2016 Fusions and 2013-2015 Lincoln MKZs due to potentially faulty seat belts. Apparently, that wasn't the end of it. Ford announced another recall this week for the same issue, this time covering 108,399 2015 Fusions and MKZs.  In both cases, the seat belt anchor pretensioners are the issue. According to Ford, "increased temperatures generated during deployment of the driver or front-passenger seat belt anchor pretensioner could degrade the tensile strength of the cable below the level needed to restrain an occupant." Basically, heat could weaken the seat belts, and in extreme cases, they wouldn't be able to keep up proper safety standards. Ford knows of at least one injury that has occurred due to this issue.   The recall includes 103,374 vehicles in the United States, 4,002 in Canada, and 1,023 in Mexico. Possibly affected Fusions were built at Ford's Flat Rock Assembly Plant between August 1, 2014 and January 30, 2015. The MKZs were built at the Hermosillo Assembly Plant between August 1, 2014 and November 21, 2014.  As a fix, Ford says dealers will add an extra coating to the seat belt pretensioner cable for protection from the heat. If this recall might affect your vehicle, call your local Ford dealership and use recall reference No. 19S25. This news comes after Ford recalled 1.3 million Fusions and MKZs in 2018 due to the possibility that the steering wheels could fall off. Fusions have also been recalled due to the risk of rolling away.