What We Think To Be Mint 1967 Ford F-100 With A/c Fully Restored 390 V-8 Sweet on 2040-cars

Auto blog

Recharge Wrap-up: Ford 1.0L EcoBoost a hit in Europe; Build a tiny inverter, win $1 million

In Europe, Ford's 1.0-liter EcoBoost engine is the best-selling turbocharged gasoline engine. The three-cylinder motor powers 20 percent of new Fords sold in Europe. Earlier this year, it won its third International Engine of the Year award, and between January and June, it was sold in about 120,000 cars. So far this year, 38 percent of Fords sold in the Netherlands, 35 percent in Denmark and 32 percent in Switzerland have been powered by the 1.0-liter EcoBoost. The engine's turbocharger spins at 248,000 rpm, and provides 24 psi of pressure. The engine produces up to 138 horsepower, depending on the version. Read more in the press release below. When lithium-ion battery packs are retired from the road, remanufacturing, repurposing, and recycling are worthwhile options, according to a study by Mineta Transportation Institute. The study included a cost-benefit analysis of those three options, and found remanufacturing to be the best route. To get the most out of them, batteries should be tested and have their damaged cells replaced then put back to use. Repurposing is the second best option, using the remaining available charge for something besides cars. Recycling on its own isn't profitable, but it could make economic sense with "increased technological breakthroughs." Learn more at Recycling International or download the report here. A smaller inverter for EVs can win you $1 million. The Little Box Challenge is an open competition to build a power inverter with a density of at least 50 watts per cubic inch. Google and the Institute of Electrical and Electronics Engineers (IEEE) are offering the hefty prize to the team that builds the inverter with the highest power density within an enclosed volume of 40 cubic inches. Teams must register by September 30. Read more at Green Car Congress or learn more at the Little Box Challenge website.

All the details on Plug In 2014 electric vehicle conference you could ever want

One of the best parts of the Plug In 2014 Conference in San Jose, CA last week was getting to listen in on thoughts about the state of the plug-in vehicle industry from people who have been involved with it for ages. They bristle when you call them the "Old Guard" (learned that one the hard way), but these are the people who have been through a number of ups and downs with plug-in vehicles, so they've got what we call perspective. Their knowledge was on full display in the three plenary sessions, which the Plug In Conference organizers have given us permission to share with you. Each is at least 90 minutes long, so make sure to set some time aside to enjoy the discussions after you download them (any help with making them streamable would be appreciated). Follow us below to see what we've got to offer. Opening Plenary (audio link). "The Road Ahead – Delivering on a Vision for Sustainable Transportation." Moderated by Mark Duvall (director of energy utilization at EPRI, the Electric Power Research Institute, and a long-time EV advocate), this panel featured: Jack Broadbent, Executive Officer / APCO, Bay Area Air Quality Management District Pat Romano, President & Chief Executive Officer, ChargePoint, Inc. Aaron Johnson, Senior Director, Customer Programs, Pacific Gas and Electric Company Brendan Jones, Director, EV Sales Operations & Infrastructure Deployment, Nissan North America, Inc. David W. Cash, Commissioner, MassDEP Dan Sperling, Director, Institute of Transportation Studies, University of California, Davis Highlights: Educating drivers to "get over the gas station" is a key strategy, how Level 2 and DC Fast Charging are really "a new paradigm," that there have been well over 214,000 EVs sold in US as of July 2014 and where Nissan sees huge potential for more EV sales (Northeast US and medium-size cities like St. Louis and Pittsburgh). Wednesday Morning Plenary (audio link). "Getting to the Mass Market – A Discussion of Ideas for Widespread PEV Adoption." Moderated by John Gartner, research director for smart transportation at Navigant Research.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper.
For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011.
The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors.