Classic 1972 Ford F100 on 2040-cars
Saint Petersburg, Florida, United States
This is a great truck and is my 2nd vehicle so I only drove it a couple of times a week.The only reason I am selling it is because I am scaling down and I don't really need it. It starts and runs excellent and very reliable. The motor has been rebuilt and has about 5000 mi, the body is in good condition with a rust spot on the passenger side fender and the paint peeled on one spot on the roof. The frame is solid with no damages. The interior has been mostly redone, with newly vinyl covered seat, new headliner, visors, new stereo but needs speakers, and new carpet. The truck does not have A/C or heat. The heater controls have been removed by a previous owner and I have not worried about it living in florida. The truck is for sale locally and I reserve the right to remove the listing should it sell before the end of the auction. A $1,000.00 deposit is required within 48 hrs of the end of auction or the truck will be relisted.
|
Ford F-100 for Sale
1960 ford f100 short bed pickup - v8 - 3 speed stick
Great restoration , original 6 cylinder, only 53,649 miles, beautiful paint/trim(US $17,900.00)
Short box, step side, all original, barn find, rat rod, patina
California custom 1956 ford f100 pickup truck mopar 318/727 ford 9" ac ps 4wpdb
Beautiful 1956 ford f100 pickup truck street rod not chevrolet
1966 ford f100 ratrod custom
Auto Services in Florida
Youngs` Automotive Service ★★★★★
Winner Auto Center Inc ★★★★★
Vehicles Four Sale Inc ★★★★★
Valvoline Instant Oil Change ★★★★★
USA Auto Glass ★★★★★
Tuffy Auto Service Centers ★★★★★
Auto blog
Ford recalling 65k Fusions from 2014 and 2015 because key can be removed
Tue, 18 Nov 2014Ford is recalling an estimated 64,869 examples of the 2014-2015 Fusion, Fusion Energi and Fusion Hybrid in North America because the key can be removed when the vehicle isn't in Park under certain conditions. Specifically, the campaign covers 56,479 units in the US, 6,048 in Canada and 2,342 in Mexico, according to the automaker's tally on November 11.
Ford says a programming problem in the instrument cluster means that the key can be removed 30 minutes after the ignition is turned off, even if the transmission is not in Park. The situation where this could happen seems quite limited, and the company is not aware of any accidents or injuries related to the issue. However, the fault puts the vehicle out of compliance with federal regulations covering theft protection and rollaways, and must be repaired.
The fix is easy: Ford will reprogram the instrument cluster at no cost to consumers. According to Ford spokesperson Kelli Felker in an email to Autoblog, "We will notify customers the week of January 5th." Scroll down to read Ford's announcement.
Carfection looks for the ultimate pocket rocket
Fri, Mar 18 2016If there's one thing we love, it's a good showdown. Especially when it's on video, done by some Englishmen, and involving some manner of performance machinery. Like this latest clip, for example, from Carfection. The team formerly known as Xcar have assembled three very compelling supermini hot hatches: two we can get on our side of the pond, and one we can't. One American, one Frenchman, and one Brit. One cheap, one expensive, and one somewhere in between. They all pack turbo fours, of course, but placed in entirely different packages. There's the evergreen favorite Ford Fiesta ST, the Renault Clio RS 220 Trophy that should have the rest licked, and the retro rocket that is the Mini JCW. And there's only one way to find out which is the best. It's a tough contest, to be sure, but lest you think it all comes down to specifications or which one's the newest, you'll want to think again. Because when it comes to hot hatches, all the electronic gizmos and power boosts in the world can't show up a perfectly dialed-in chassis that lets you hug the curves and feel like you're going a lot faster than you actually are. But don't take our word for it – see what our British friends have to say about it in the Queen's English in the seventeen-minute clip above. Related Video:
Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]
Mon, Aug 4 2014It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.