2000 Ford Explorer Xls 4-door 4.0l on 2040-cars
Oakhurst, New Jersey, United States
I bought this SUV in 2002 with 35,000 miles. Five years ago I replaced the engine with a used engine with 32,000 miles on it. The engine runs great. I have receipts for the following work done, upper and lower ball joints $845.00 on 2/20/13, hub bearings and misc. $441.00 on 1/19/13, , 4 new tires and alignment 2/2013, new battery 7 months ago. All power windows and locks work. Air is ice cold and heat works great. The car will not drive in reverse but drives forward. I have not had it checked by a mechanic but I figure it needs a transmission. The car has 128,650 miles. There are some minor chips in the paint and small amount of rust above the rear back tire. The console arm rest is missing. Normal wear on interior for the year of car. Car is being sold as is. Local pick up only. Contact seller within 3 days of end of auction and car must be picked up within 7 days of auction end. Please contact with any questions you may have.
|
Ford Explorer for Sale
- 2004 ford explorer eddie bauer sport utility 4-door 4.6l
- 2014 navigation 20s aluminum leather heated sunroof v6 lifetime warranty(US $40,120.00)
- 2006 ford explorer limited sport utility 4-door 4.0l(US $9,100.00)
- 1999 ford explorer eddie bauer sport utility 4-door 4.0l(US $3,000.00)
- 2002 ford explorer xlt sport utility 4-door 4.0l 4x4(US $5,795.00)
- 2000 ford explorer xlt sport utility 4-door 4.0l
Auto Services in New Jersey
Wales Auto Body Repair Shop ★★★★★
Virgo Auto Body ★★★★★
VIP Car Care Center Inc. ★★★★★
Vince Capcino`s Transmissions ★★★★★
Usa Exporting ★★★★★
Universal Auto Repair, Inc ★★★★★
Auto blog
Lincoln MKC recalled because start button located too close to touchscreen [UPDATE]
Wed, Dec 31 2014UPDATE: Ford spokesperson Kelli Felker responded to our questions and let us know that the fix for the push-button start on the 2015 MKC has the switch moved to the top of the of the column of gear shift buttons instead of the bottom. Owners should be notified about both campaigns "toward the end of February." After massive campaigns from General Motors and to fix Takata airbag inflators, 2014 will undoubtedly go down as The Year Of The Recall. And with little time to spare, Ford is getting in just under the wire to adding two more to its yearly total. The larger of the campaigns is actually one of the most bizarre campaigns we've heard of all year. Lincoln is recalling 13,574 units of its 2015 MKC compact crossover in North America to move the location of the push-button ignition switch on the dashboard. According to the automaker's announcement: "Due to the switch's close proximity to other controls, occupants are inadvertently shutting off the engine while driving." The button is located near the bottom of the touchscreen, which can apparently make it possible to hit by mistake. Back when Autoblog first drove the new MKC in June, we came away very impressed, but noted: "... we're still not completely sold on the aforementioned pushbutton transmission selector ... it still seems somewhat gimmicky and it can't be operated by feel alone, as you might when shifting a traditional console-mounted lever from Park to Drive." According to Lincoln, there have been no reported accidents or injuries stemming from this button misapplication. Of the affected vehicles, there are 11,144 in the US, 2,033 in Canada and 397 in Mexico. To fix the problem, dealers are moving the button to a different location and reprogramming the powertrain control module. According to Automotive News, models built since September already have a different layout. The change was reportedly done to match the rest of the Lincoln lineup. The second recall covers 12,205 units of the 2014 Ford Escape (2015 model year pictured below) and 2015 Lincoln MKC in North America because of a problem with nickel plating on the fuel pump. The issue can cause the pump to seize, which can cause the crossovers not to start or stall while driving. The automaker is not aware of any accidents or injuries related to this fault. Dealers are replacing the fuel deliver module to fix the situation. Of the affected vehicles, there are 9,038 in the US, 3,074 in Canada and 93 in Mexico.
Shelby to auction 2012 GT350 No. 1 in Vegas
Thu, 19 Sep 2013With Shelby preparing to wind down production of its brutal GT350, a 624-horsepower Mustang that's meant to go up against the Roush Stage 3 in the world of tuned Ford ponycars, the Las Vegas-based tuner is looking to give back to one lucky customer. It'll auction off the very first GT350 ever produced, at the 2013 Barrett-Jackson auction in Las Vegas, a three-day event that runs from September 26 through September 28.
The GT350 is a monster, with a 5.0-liter, supercharged V8 that's been tuned well past 600 horsepower in a time when Ford's own Shelby-branded GT500 barely reached 550 horsepower. The GT350 is much louder than Ford's effort, too, both visually and audibly. The wide body look isn't what we'd call conventional, but on a car that sounds and goes like this, something extreme is needed. According to Shelby American's vice president of production, Gary Davis, "Carroll was very excited about the new wide body option, so that was included on this car. It's the first 2012 GT350 serial number from our anniversary year. It is a very special car." Wilwood brakes, a massaged suspension, and some very fat, sticky tires add to the Shelby experience.
This particular GT350 will be lot number 750, and will cross the Barrett-Jackson stage on Sunday, September 28.
Ford Mustang Shelby GT500 has a bit of a dyno issue
Tue, 28 May 2013We're of the mind that each and every dyno should come with Murphy's Law painted in big, visible letters down the side. For every ten successful dyno runs out there, it seems there's one where events to horribly wrong. Take, for example, the video below. The clip shows what happens when a Ford Shelby GT500 and a mobile dyno have a bit of a disagreement at the Performance Expo 24 in Sherbrooke, Quebec. We won't spoil the results for you, but we will say there's some substantial carnage involved.
It's unclear just how much damage ensues from the dust up or whether anyone was harmed in the incident, but from the looks of things, everyone made it out without serious injury. If only we could say the same for the machines involved. Check out the video below.