Ford Explorer Sport 4x4, Runs,looks And Drives Perfect, No Reserve on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Ford books $1.2B profit in second quarter on strength of trucks

Ford is rolling along nicely, with a positive second-quarter sales report and a $2.3 billion profit in North America. The Dearborn, Michigan-based manufacturer captured $1.2 billion globally from April to June, with a $177 million profit in Asia. Even in Europe, the land of doom and gloom for automakers not named Mazda, Ford saw some success as it lowered its expected full-year loss from $2 billion to $1.8 billion. The company lost $348 million in Europe during the second quarter, which, believe it or not, represents a $56-million improvement over 2012.
According to the report on CNBC, Ford enjoyed a three-percent increase in pre-market trading thanks to the news. The strong demand for the F-150 propelled growth in the US market, while Ford's 47-percent increase in Asian sales can be attributed to the new EcoSport crossover and Kuga (Ford Escape in the US) arriving in the somewhat fragile Chinese market.
Pre-tax profits for Ford are expected to be in the neighborhood of $8 billion by the end of the year, with sales the US, Europe, and China all looking up. The company also shifted $4.78 billion of asset-backed debt in the form of bonds, according to a report by Bloomberg. This move came amidst rumors of the Federal Reserve cutting back on its $85-billion-per-month bond purchases. Ford wasn't alone among automakers looking to sell off debt, though, as Mercedes-Benz and Nissan shifted around $1 billion each in bonds relating to auto loans.

Ford GT, Buick Avenir and Audi Q7 take 2015 EyesOn Design awards

The annual EyesOn Design Awards at the Detroit Auto Show allows some of the greatest designers in the world to weigh in on the best production and concept debuts at the big event each year. For 2015, the large panel of judges included luminaries like Frank Stephenson of McLaren, Ralph Gilles from FCA and Moray Callum of Ford. Apparently the editors at Autoblog had a good eye because the winner of 2015's Best Designed Production Vehicle award went to the Ford GT, which was also our favorite debut from the show. The new supercar beat the Acura NSX and Mercedes-Benz GLE-Class Coupe for the honor. The judges described the Blue Oval's shape as "capturing the original GT40 in a modern interpretation," according to EyesOn Design. The Buick Avenir was also a big winner in the awards this year and received the nods for both Best Designed Concept Vehicle and Innovative Use of Color, Graphics and Materials. In the concept category, it beat out the Chevrolet Bolt and Mercedes-Benz F 015, and in the latter group, the sedan triumphed over Audi Q7, Mercedes F 015 and Volkswagen Cross Coupe GTE. The Q7 received its own accolade for Best Designed Interior, and it beat the Avenir and Infiniti Q60 for the honor. This year's Lifetime Design Achievement Award went to former Renault designer Patrick le Quement, and Bob Lutz received the EyesOn Design Catalyst Award for the second time. The honor is for an executive "who has empowered great design," according to the organization, which describes Lutz perfectly. Scroll down to read the announcement with more comments about the winners. Related Video: Ford, Buick, Audi recipients of EyesOn Design Awards at North American International Auto Show EyesOn Design Awards for Design Excellence for 2015 were revealed today at the North American International Auto Show. The awards honor the most significant automotive designs revealed at NAIAS as determined by the North American and global leaders of design from automotive manufacturers, along with academic chairs of transportation design programs and design leaders from other fields.