2014 Ford Explorer Xlt on 2040-cars

Auto blog

Ford recalls 2020-21 Explorer and Lincoln Aviator, 2021 E-Series

Ford announced safety recalls for the 2020-2021 Explorer and Lincoln Aviator along with the 2021 E-Series early Monday. The recalls address entirely different issues.  In the case of the 2020-2021 Ford Explorer and Lincoln Aviator, that issue is motor mount hardware. Specifically, the fasteners that secure the passenger-side motor mount may back out. In Ford's words, this can result in a "loss of power," which is the entirely predictable result of an engine parting ways with the vehicle it powers.  As alarming as that may sound, owners should not have to worry about anything extreme, as the passenger side mount is only one of multiple, and Ford says it is not aware of any incidents that have occurred with vehicles in customer hands. Ford says it impacts only about 1400 examples of the Explorer and Aviator in the States (plus two in Mexico and 65 in Canada) that were built at Chicago Assembly Plant between July 28 and 30, 2020. Ford is in the process of alerting its owners to the recall, and those with affected models will have their mount hardware replaced by their local Ford dealerships free of charge.  The 2021 E-Series is being recalled for a potential heat management issue resulting from improperly aligned thermal insulation on the underside of its engine cover. In vehicles where this insulation was not properly installed so that it reaches all the way to the edges of the cover, the resulting heat bleed can cause high in-cabin surface temperatures, and direct contact them could result in burns.  This is the larger of the two recalls, as Ford says it covers nearly 33,000 examples sold in the United States and Canada. Fortunately, as with the above issue, Ford says it has not been made aware of any customer incidents. Ford says the remedy is a set of insulation patches for the exposed areas.  Related Video:

UK's Loughborough University improving Ford's 1.0-litre EcoBoost engine

How much does it cost for college students to study zero emissions vehicles? At Loughborough University in the UK, a new Advanced Propulsion Centre (APC) is being built at a cost of a billion pounds ($1.7 billion US). The school has just announce that it will fund a number of grad student positions and is creating a new Chair in Advanced Propulsion Systems, which sounds like a fun job to us. We're weird like that. There will be a total of four professor-type positions in the new Center, including the chair, all focused on teaching students about low-carbon vehicle technologies, specifically electric and hybrid ones. The school is investing 1.5 million pounds ($2.5 million) for the new positions. There is a bigger picture as well, a 26-million pound ($44 million) Advanced Combustion Turbocharged Integrated Variable-valvetrain Engine (ACTIVE) project, which uses funds not only from the school but also from Ford and others. The point of ACTIVE is to study Ford's 1.0-liter EcoBoost engine and "improve further its efficiency and ensure it exceeds 2020 emission regulations." This is already a popular engine for the automaker, and it will need to stay at the bleeding edge of efficiency to remain as important in 2020 as it is today. Loughborough University has been working with automakers on advanced energy technologies for years, for example with Rolls-Royce and fuel cells in 2007 and the Lotus Hotfire engine in 2008. University invests GBP1.5M in advanced propulsion research to advance zero emissions vehicles challenge Loughborough University is investing GBP1.5M over five years in strategic research appointments, inspired by the global challenge to develop the new advanced propulsion technologies required for the move to zero emission vehicles. These appointments reinforce the University's world-class research in low-carbon vehicle technologies, adding new dimensions concerned with electric and hybrid drives. Four appointments will be made, including a Chair in Advanced Propulsion Systems, supported by a number of PhD studentships. The GBP1.5M investment is part of the University's commitment to the recently announced Advanced Propulsion Centre (APC) to support the development of new supply chains for low carbon vehicles. APC is an initiative established by the Automotive Council that will see GBP1 billion of investment from government and industry over the next 10 years.

Ford F-Series Super Duty prototype reduced to smoldering mess of aluminum and steel [UPDATE]

The most important bit of information you need to know after looking through our high-res gallery of images depicting a prototype 2016 Ford F-Series Super Duty pickup truck burning to the ground is that nobody was hurt. There were two engineers inside the vehicle when it caught fire, and both exited to safety.
That's the good news. The bad news is that the truck, which appears to have been testing in Death Valley, appears to be a total loss, minus, of course, whatever information Ford can glean from the conflagration - particularly tracing it back to its root cause. Besides that, we're also expecting the body of the next Super Duty to be hewn from aluminum, as is the case with its smaller brother, the brand-new F-150. Note the little aluminum droppings littering the roadway as apparent proof of that.
Our spy photographers report that it took just 21 minutes for the F-Series Super Duty to burn completely to the ground. The fire appears to have started in the driver-side front wheel well, spreading to engulf the entire front end in three minutes. We can't confirm the source of the blaze, but we're curious if the car's black vinyl cladding, meant to obscure the secrets within, contributed to the fire.