1997 Ford Explorer Sport Sport Utility 2-door 4.0l No Reserve!! on 2040-cars

Auto blog

Recharge Wrap-up: Atieva making EV with former Tesla talent, Holland lowers PHEV incentives

A reduction of tax incentives on company cars in Holland is expected to put the brakes on plug-in hybrid sales. Cars are taxed at an average of 25 percent, with plug-in hybrids taxed at just seven or 14 percent, depending on emissions. Taxes on PHEV company cars will increase to 14 and 21 percent. With company car leases making up a third of vehicle sales in 2014, the uptake on PHEVs "will likely go back to regular volumes," according to Volvo's Christiaan Krouwel. It could be a boon for battery electric cars, as their tax rate will remain at four percent for company cars. Read more at Automotive News Europe. Ford is testing cylinder deactivation in its 1.0-liter EcoBoost engine. On-road prototype testing has shown improvements in fuel economy of as much as six percent. Ford engineers developed a system using a new dual mass flywheel, pendulum absorber, and tuned clutch disc to allow cylinder deactivation under a wider range of speed and engine loads with less NVH. "The highest priority in the development of new combustion engines for automotive applications is the ongoing reduction of fuel consumption," says Ford's Andreas Schamel, presenting Ford's findings to the Vienna Motor Symposium. Read more at Green Car Congress or in the press release from Ford. Atieva is building an EV with the help of numerous former Tesla employees. The Silicon Valley-based startup was founded in 2007 by a former Tesla vice president, and its roster includes 12 other former Tesla employees. Already well funded, Atieva is now looking to fill its ranks with more talent, with 32 engineering positions, two recruiter positions and other job openings posted at its website. As for the EV it is working on, Atieva says it is "redefining what a car can be, by building an iconic new vehicle from the ground up." Read more at Charged EVs. Testing shows that Joule ethanol, made from recycled CO2, meets standards for use in the US and Europe. In partnership with Audi, Joule has been working toward making its recycled CO2 fuels ready for commercialization. "We are pleased to achieve another critical step towards our planned near-term delivery of fuel-grade ethanol from recycled CO2," says Joule President and CEO Serge Tchuruk. "Using waste CO2 as a feedstock, our technology has the two-fold advantage of reducing greenhouse gas emissions and producing cost-competitive, drop-in fuels." Joule will use these test results to get government approval for the use of its ethanol in highway fuel.

Ford's new Focus RS hatches hot and heads for America

The hot hatch market is heating up, and heating up fast. What you see here is Ford's new challenger for pocket-rocket supremacy, the third iteration of the breed and the 30th model to wear the Rallye Sport designation. But perhaps best of all, it will be the first time Ford will offer a new Focus RS in America. Following yesterday's leak, the latest Ford Focus RS is now ready to step out into the light and light up its tires. Answering the call is the same 2.3-liter EcoBoost turbo four as you'd find in the new Mustang, but upgraded with a new low-inertia twin-scroll turbocharger, larger compressor and intercooler, freer-flowing intake, large-bore dual-pipe exhaust with electronically controlled valve and upgraded internal components. The result is a 6,500-rpm redline (closer to that of Ford's atmospheric performance engines) and an output quoted as "well in excess of 315 horsepower" – which is already 5 more than the EcoBoost Mustang and a good 63 more than the existing Focus ST. Power is transmitted to the tarmac through a new performance-focused all-wheel drive system with torque vectoring that can send as much as 70 percent of available twist to the rear wheels (and as much as 100 percent between them). The system works in tandem with the brake-based torque vectoring system and stability control, and will even divert torque to the outside rear wheel under cornering to keep it flat and under control while reducing understeer. Those still suspicious of dual-clutch gearboxes will also be pleased to read that Ford has stuck with a conventional six-speed manual. We'll reserve judgement on the inclusion of the electric power steering until we get a chance to drive it, though. Of course the small team of global Ford Performance engineers who developed the new Focus RS – and the Gymkhana legend Ken Block who consulted on the project – didn't just tinker with the powertrain and leave it at that. The suspension features stiffer spring rates, bushings and anti-roll bars than the Focus ST, augmented by two-mode switchable dampers. 19-inch alloys wear Michelin Pilot Super Sport rubber, with optional Pilot Sport Cup 2 semi-slicks for track-day enthusiasts. Ford has yet to detail the brakes on its new hot hatch, but you can bet they've been upgraded as well.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video: