2012 Ford Expedition Xlt 5.4l , Traction Control 4x4 on 2040-cars

Auto blog

Ford Fiesta rally car warms up in Sweden

Rallycross is seeing a sudden surge in popularity with two series bringing the racing to the US and Europe. The Ford OMSE team is competing in both championships this season, and it saw no reason not to hold practice with a highly modified Fiesta in the snow of Northern Sweden. It brought together Andreas Bakkerud from the European-focused FIA World Rallycross Championship and Patrik Sandell from the North American-focused Global Rallycross series for some training and fun. They certainly appear to be enjoying themselves, too, with some lovely pirouettes in the powder.
If you're unfamiliar with rallycross, the discipline combines the best of rallying and circuit racing. Drivers (with no co-drivers) race rally cars over a circuit that generally mixes dirt and asphalt, and unlike traditional rallying, multiple cars compete side-by-side at once. Even better, it's often a very two-fisted form of motorsports with lots of car-to-car contact. Global Rallycross and World Rallycross will both kick off their seasons in May. With spring on the way, scroll down to watch the Fiesta kick up some of the last snow drifts of the year.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.

Ford trademarking 'Mach 1,' possibly for Mustang

A legendary name might be accompanying the redesigned, 2015 Mustang when it finally makes its world debut - Mach 1. Stumbled upon by the team at Ford Authority, the Mach 1 title was found in a trademark filing with the US Patent and Trademark Office, and would revive a name last used on the fourth-generation, 2003 Mustang.
While the the 2003 vintage was well and good, the Mach 1 is really remembered for a three-year run from 1969 to 1971 - it's best to just forget the emissions-choked 1972 to 1978 Mach 1s - when power output ranged from a modest 250 horsepower with the two-barrel, 351-cubic-inch Windsor V8 to "375 hp" (actual output was rumored to be well north of 400 horsepower) with the righteous, 429-cubic-inch Super Cobra Jet V8.
What does the title hold for the sixth-generation Mustang? It's tough to say. The fanatics at Ford Authority seem to think Mach 1 could take the place of the Shelby GT500 at the top of the Mustang hierarchy, which sounds like a valid argument. At the same time, we could see the SVT Cobra moniker returning for the flagship model, and the Mach 1 doing battle with the Chevrolet Camaro Z/28 (unless the Boss 302 were to return). Confounding things is the historical precedent - the Mach 1 was responsible for the death of the Mustang GT in 1969, so it might make sense as a volume performance model.