2020 Ford Escape on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

This is the 2016 Ford Explorer Platinum, full of Nirvana

We knew two the most important things about the Platinum trim on the Ford Explorer when the configurator arrived online at the end of last year: it starts at $52,600 and comes standard with just about everything. In advance of the Explorer Platinum arriving at dealerships in September, Ford's dropped details on the superluxe crossover and what its chief designer calls "the most upscale, high-quality interior we've ever offered on a Ford vehicle in North America." So-called Nirvana leather goes everywhere, on the micro-perforated front seats, the rear seats, the instrument panel, armrests, door bolsters, and upper door trim. It looks like it can be had in two colors, either Soft Ceramic or Ebony, with a headliner colored Anthracite that goes with a matching, fabric-wrapped A-pillar. Elsewhere, there's genuine aluminum and ash wood, a stitched-leather-and-wood steering wheel with a brushed aluminum Ford logo, and a gauge cluster with a 10-inch digital display flanked by analog dials. View 16 Photos Another first is the 500-watt Sony stereo, the first time that brand has incorporated its premium home audio technology into a vehicle. Twelve speakers in ten locations are said to be able to recreate the sound from several concert halls around the world, and to stage instruments and voices around the cabin the same way you'd hear them at home. The Explorer Platinum is less ostentatious outside, with LED headlights, silver skidplates front and back, and special 20-inch wheels denoting the Platinum from other trims. The 365-horsepower, 3.5-liter EcoBoost V6 is standard, along with Terrain Management, active park assist that works for both perpendicular and parallel spots, lane keeping assistance, and rain-sensing wipers. The two press releases below go over all the goodies.

Ford director says company has big efficiency plans, but no dedicated EV

The annual autofest known as the North American International Auto Show previews a plethora of exciting new products that we'll see and drive later in the year, from tiny urban commuters to family sedans and crossovers to hard-working big pickups and SUVs. It's also a once-a-year cornucopia of auto executives and leaders from around the world. "There will be some really fun stuff that you'll hear about in the future" - Ford's Kevin Layden So, in-between dozens of cool new-product unveilings on rotating stages during the two press days preceding the public show, we auto scribes grab what planned and impromptu interviews we can. Sessions with top industry leaders can be hard to get, but I was able to score a seat in a group session with then-General Motors North America president (now executive VP of global product development) Mark Reuss, and I also managed brief one-on-ones with a trio of vehicle electrification leaders, one each from Ford, BMW and GM, and what they said then remains relevant now. First up is Kevin Layden, Ford's Director of Electrified Powertrain Engineering. ABG: Where will Ford go beyond its current Focus EV and hybrids, and will there be a Ford EV and/or hybrid on its own energy-optimized platform one day. KL: We don't want to do a dedicated electric vehicle with all the development costs borne by a niche product. At the Michigan Assembly plant right now we're building the Focus electric, PHEV and EcoBoost on the same assembly line. Also the C-Max, with both a hybrid and an Energi plug-in, and we use that same power pack in the Fusion Hybrid and Energi. We want to be, "The power of choice" [a Ford marketing slogan], so having that choice for customers is very important. And if I want to sell the Fusion, Focus and C-Max globally, we can use these power packs wherever it makes sense. So as we go forward, you'll see us proliferating the power packs we have today. Then the question is, what do we do next? There will be some really fun stuff that you'll hear about in the future. ABG: Is the efficiency difference between a dedicated ultra-efficient vehicle platform and a shared multi-use platform getting smaller as all platforms get more efficient? KL: Exactly. Were going through aero studies now on wheels and tires and hood sealers on base vehicles. We have full aerodynamic wind tunnel studies going on with the base Focus and C-Max, so all of that [aerodynamic improvement] will be there for EVs.