Awd Heated Leather Myford Touch Rear Camera Microsoft Sync Free Shipping on 2040-cars

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Pony-car sales war: Mustang vs. Camaro vs. Challenger [UPDATE]

Update: An earlier version of this story misstated the 2015 Mustang's weight when compared with previous models. Additionally, we have added comments from Chevrolet in the text. The Ford Mustang has blown past the Chevy Camaro as America's best-selling pony car, and in June, it wasn't even close. The 'Stang outsold the Camaro 11,719 to 8,611 cars. The Camaro remained ahead of the Dodge Challenger, which sold 6,845 units. Even though the Camaro did post an 11.5-percent sales improvement in June, the competition is arguably stronger than at anytime since the 1970s muscle-car era. The Mustang's sales leapt a whopping 53.6 percent, while the Challenger saw a gain of 56 percent. Several factors are weighing down Camaro sales, including its lame duck status. Chevy is launching a new generation of the Camaro this year that's more than 200 pounds lighter, offers a new turbo four-cylinder engine option, and has a nicer interior than the outgoing model. Put simply: wait a few months and you can get a better car. It's also unlikely Chevy will jack up the price much, as it's historically kept the Camaro within reach of everyday enthusiasts. While Chevy fans wait in anticipation for their new sports car, Ford and Dodge have downshifted. The new Mustang, which went on sale last year, is faster and more sophisticated than its predecessor. It also offers a 2.3-liter EcoBoost four-cylinder, which Ford has credited for the Mustang's recent uptick and makes up 36 percent of the car's sales, Ford analyst Erich Merkle said. View 17 Photos June's performance allowed the Mustang to widen its sales gap with the Camaro this year. Through the first five months, Ford sold 68,290 Mustangs, a 54.4-percent increased compared with 2014. Chevy sold 42,593 Camaros, an 8.7-percent decrease. The Challenger – long the No. 3 pony car in sales volume – has seen its sales surge 41 percent this year to 37,011 units. Spokesman Monte Doran said Chevy expected that 2015 would be a "relatively soft year" for the Camaro. "Mustang is taking advantage of years' worth of pent-up demand for an independent rear suspension," he said. "When Camaro introduced an IRS, in 2009, it helped make us the best-selling performance car in America.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.