2009 Ford Edge Sel - Excellent Condition on 2040-cars

Auto blog

Performance cars overpower the Detroit Auto Show

At precisely the stroke of noon on Monday, the 2016 Acura NSX rolled on stage at the Detroit Auto Show amid plumes of smoke and dancing lights. The sounds of the powerful engine revving soared to the rafters. It was the second coming of Acura's iconic sports car, and the reveal had all of the expected trappings. Afterwards, champagne corks popped and the bubbly flowed. It was noon in Detroit, but for the green-car movement, it seemed like the clock had struck midnight. That's an exaggeration, but performance was the overwhelming theme of North America's most important show. Ford – which has helped lead the way in smaller displacement engines and early adoption of hybrid powertrains – had more than 1,500 horsepower on stage one point after it revealed the GT concept, the new F-150 Raptor and the Shelby Mustang GT350R. The NSX is technically a hybrid (it has three electric motors), but with 550-plus hp, there's no doubt this Acura was bred on the track. The theme continued throughout the show at nearly every stand. Alfa Romeo showed off the 4C Spider, which is the open-air version of a car that purports to be the spiritual successor of the high-performance 33 Stradale from 1967. On Tuesday, Cadillac is scheduled to reveal the 640-hp CTS-V with the V8 transplanted from the Corvette Z06, and the Lexus was expected to roll out its own V8-powered beast, the 467-hp GS F. For enthusiasts – especially enthusiasts with money – these are halcyon days. But make no mistake, all of this power has a purpose. Ford product chief Raj Nair said the Blue Oval uses high performance cars to develop technologies, like aerodynamics and materials, which are then shared across its lineup. "It's another proof point about how serious we are in developing innovation through performance," he said. Ford, which is rolling out at least 12 performance cars by 2020, said the sporty cars attract younger and more influential buyers to its fold, which can help burnish its image beyond adding sales volume. Toyota is taking a similar approach, senior vice president Bob Carter said, noting the Lexus RC coupe draws people into showrooms and gets them excited about the brand, even if they don't end up buying one. "They provide an aspiration and a halo that provides the attention that gets you noticed in a cluttered market," he said.

NHTSA advances investigation of Ford Crown Victoria headlights

The National Highway Traffic Safety Administration is opening a preliminary evaluation into reports of suddenly failing headlights on 517,945 examples of the 2003-2005 Ford Crown Victoria and Mercury Grand Marquis. The government started looking into this problem in April when the North Carolina Consumers Council filed a defect petition with the agency. Now, the inquiry has moved to the next step. According to NHTSA's documentation (as a PDF), it examined its own database and worked with Ford to come up with a total of 3,609 complaints of the front lighting control module suddenly failing. When this happens, drivers lose the low-beam headlights, but the high-beams can be used by holding the stalk. Sometimes turning the switch off and on fixes the issue. Additionally, there are 15 allegations of crashes, and one reported shoulder injury. NHTSA's preliminary evaluations "evaluate the scope, frequency, and consequence of the alleged defect" and don't necessarily lead to a recall. NHTSA looked into this problem once before in 2008 and 2009 and decided that a recall wasn't necessary. Ford also extended the warranty on the front lighting control module for these vehicles. INVESTIGATION Subject : Loss of headlights Date Investigation Opened: AUG 10, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15028 Component(s): EXTERIOR LIGHTING All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD CROWN VICTORIA 2003-2005 MERCURY GRAND MARQUIS 2003-2005 Details Manufacturer: Ford Motor Company SUMMARY: After receiving a defect petition (DP15002) concerning the loss of headlights and other exterior lighting in model year (MY) 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles, the Office of Defects Investigation (ODI) analyzed Vehicle Owner Questionnaire (VOQ) complaints received from consumers and identified a total of 605 reports (for all submission dates) alleging headlight failure. The complaints indicate failures of both low beam headlights typically while driving, a defect condition that was evaluated under a prior ODI investigation (PE08066). Most consumer VOQs indicate that the headlights failed suddenly and without warning leaving the driver with no forward lighting, however some report the headlights flickered or dimmed prior to turning off. In some cases drivers were able to turn the headlights back on after a period of time while others reported the headlights would not come back on at all.

GM readying aluminum-body fullsize pickups

Ford's extensive use of aluminum in its 2015 F-150 is a big deal. A really big deal. Big enough, in fact, that General Motors is reportedly changing its fullsize pickup strategy. According to The Wall Street Journal, The General has locked in partnerships with Alcoa Inc. and Novelis Inc. - companies that will supply aluminum for the next-generation Chevrolet Silverado and GMC Sierra trucks.
"Ford's introduction of the 2015 F-150 pickup truck was a game changer, and it's the first, not the last, conversion of this type," Novelis spokesperson Charles Belbin told the Journal. The switch to aluminum has allowed Ford to shave roughly 700 pounds off its fullsize truck's curb weight. And while official mileage ratings have not been announced, the weight loss should go a long way for improving efficiency, especially when combined other efficiency-minded improvements including better aerodynamics and new, turbocharged V6 engines.
Of course, aluminum-bodied cars are nothing new. But extensive use of aluminum in a major, best-selling product like the Ford F-150 is expected to kick off widespread use of this weight-saving material as availability rises and cost decreases. The WSJ reports that GM had originally explored the idea of moving to aluminum pickups back in 2008, but abandoned the idea due to cost concerns amid economic woes.