1934 Ford Coupe on 2040-cars

Auto blog

2015 Saleen 302 Black Label Mustang unveiled with 730 horsepower

The last time Saleen made these pages it was to report that the firm was out of money. However, just before that announcement, the tuning specialist told us about the three Saleen 302 Mustangs it was developing at three levels - White Label, Yellow Label and Black Label, with those latter two trims to put out 640 horsepower and 565 pound-feet of torque. Well, the Black Label is here - don't let the California Sunset paint fool you - and it's more powerful than planned, with 730 hp and 600 lb-ft blasted out of a 5.0-liter Coyote V8 hooked up to a twin-screw supercharger. Saleen says it's the most powerful, refined, and advanced Mustang it has ever built. Keeping all that power on the road is the increase in downforce that comes from a body that's been extended one inch in front and two inches in the back, and the wing suspended over the decklid. The stock suspension is refitted with Saleen S4 springs, shocks, swaybars and bushings, and the 20-inch wheels on 275-section rubber hide 15-inch dimpled rotors. The interior gets the requisite frills in leather and contrasting stitches, as well as new gauges and badging. It'll take $73,214 to open the door, but just $2,015 to put down a deposit. For more info, check out the press release below. Related Video: 2015 Saleen 302 Black Label Mustang March 15, 2015 -- Earlier this year, Saleen Automotive released their 2015 White and Yellow Label 302 Mustangs to much fanfare. To round out their fleet, Saleen pulled out all the stops and developed one of the best Mustangs to date. This car is set to change the way pony cars are looked at from here on out. At a one-of-a-kind event in Downtown LA, Saleen raised the curtain on the latest pony car out of their Corona, CA headquarters. "Since I started building cars in 1984 my goal has always been to go above and beyond where anybody has been before", said Steve Saleen. "This will by far be the most refined and advanced Mustang we have built to date." With over 30 years of experience in both racing and manufacturing vehicles, it was only a matter of time before Saleen built a Mustang as comprehensive and technologically advanced as the 2015 302 Black Label. Power Saleen combined the reliability and potency of the 5.0L Coyote motor with a twin-screw supercharger. The pair produces the most power from a production Mustang yet at 730 horsepower and 600 lb-ft of torque on 91 octane gas.

Ford partnering with MIT, Stanford on autonomous vehicle research

Ask any car engineer what's the biggest variable in achieving fuel economy targets, and he'll tell you "the driver." If one human can't understand human driving behavior enough to be certain about an innocuous number like miles per gallon, how is an autonomous car supposed to figure out what hundreds of other drivers are going to do in the course of a day? Ford has enlisted the help of Stanford and the Massachusetts Institute of Technology to find out.
Starting with the automated Fusion Hybrid introduced in December, MIT will be developing algorithms that driverless cars can use to "predict actions of other vehicles and pedestrians" and objects within the three-dimensional map provided by its four LIDAR sensors.
The Stanford team will research how to extend the 'vision' of that LIDAR array beyond obstructions while driving, analogous to the way a driver uses the entire width of a lane to see what's ahead of a larger vehicle in front. Ford says it wants to "provide the vehicle with common sense" as part of its Blueprint for Mobility, preparing for an autonomous world from 2025 and beyond.

Again? Ford issues second 2015 Fusion and Lincoln MKZ seat belt recall

In 2016, Ford issued a recall for 603,392 2013-2016 Fusions and 2013-2015 Lincoln MKZs due to potentially faulty seat belts. Apparently, that wasn't the end of it. Ford announced another recall this week for the same issue, this time covering 108,399 2015 Fusions and MKZs.  In both cases, the seat belt anchor pretensioners are the issue. According to Ford, "increased temperatures generated during deployment of the driver or front-passenger seat belt anchor pretensioner could degrade the tensile strength of the cable below the level needed to restrain an occupant." Basically, heat could weaken the seat belts, and in extreme cases, they wouldn't be able to keep up proper safety standards. Ford knows of at least one injury that has occurred due to this issue.   The recall includes 103,374 vehicles in the United States, 4,002 in Canada, and 1,023 in Mexico. Possibly affected Fusions were built at Ford's Flat Rock Assembly Plant between August 1, 2014 and January 30, 2015. The MKZs were built at the Hermosillo Assembly Plant between August 1, 2014 and November 21, 2014.  As a fix, Ford says dealers will add an extra coating to the seat belt pretensioner cable for protection from the heat. If this recall might affect your vehicle, call your local Ford dealership and use recall reference No. 19S25. This news comes after Ford recalled 1.3 million Fusions and MKZs in 2018 due to the possibility that the steering wheels could fall off. Fusions have also been recalled due to the risk of rolling away.