Find or Sell Used Cars, Trucks, and SUVs in USA

1976 Ford Bronco Sport Body Off Restoration Nice Condition! V/8 Auto Ps Pdb Look on 2040-cars

US $24,500.00
Year:1976 Mileage:5000 Color: Blue /
 Blue
Location:

Ward, Arkansas, United States

Ward, Arkansas, United States
Advertising:
Transmission:Automatic
Body Type:Wagon
Engine:302 V/8
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Dealer
Condition:
Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ...
VIN (Vehicle Identification Number)
: U15GLB82541
Year: 1976
Number of Cylinders: 8
Make: Ford
Model: Bronco
Trim: SPORT W/O CHROME TRIM
Warranty: Vehicle does NOT have an existing warranty
Drive Type: 4 x 4
Options: 4-Wheel Drive
Mileage: 5,000
Exterior Color: Blue
Interior Color: Blue
Disability Equipped: No

1976 Ford Bronco Sport  body off restoration!  this bronco is nice has a very slick paint job it started with all new front and center and rear floor pan set and front fenders outer rockers to fix what was rusty everything that was bad was cut out and replaced with new metal from Bronco Hut the motor has been rebuilt has 302 with aluminum intake and new holley 600 carb has headers that makes it sounds awesome with the new 2.5 exhaust with tips and flow masters this rig has factory power steering power disk brakes with new 2.5 suspension lift from James duff and all new shocks also has new 32x11.50x15 all terian tires on new 15x8 procomp aluminum wheels the whole floor in bronco was sealed and rhino lined has new blue carpet and all new hounds tooth interior with door panels from Bronco hut.this rig has all new seals, emblems,flairs,fuel tank,channel kit,arm rest the list goes on its ready for the road the rig was painted appx 1 year ago and just now been finished its not perfect but very nice runs and drives good!i have clear Arkansas title please look at all pictures come look at it in person or send inspector dont think you will be disappointed if you have any questions please ask threw email or you can call me at (501) 940-1213 i want a 500.00 non refundable deposit 24 hours after auction and balance 7 days NO EXCEPTIONS cash, or bank wire transfer cashiers check is fine but must clear bank before pick up.and if you need it transported i have a contact i also reserve the right to end auction at anytime! also not interested in any kind of trades or telling the reserve its priced to sell.thanks!!

Auto Services in Arkansas

Young Tire & Auto ★★★★★

Auto Repair & Service, Tire Dealers, Brake Repair
Address: 200 Nalley Rd, Higginson
Phone: (501) 843-3538

Walker Engine Service ★★★★★

Auto Repair & Service, Automobile Machine Shop, Engine Rebuilding & Exchange
Address: 3554 Jackson Ave, West-Memphis
Phone: (901) 458-8692

Turner`s Muffler Oil & Lube ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Oil & Lube
Address: 200 N Lockard St, Gosnell
Phone: (870) 762-2614

Snappy Windshield Repair ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: 7726 Highway 51 N, Horseshoe-Lake
Phone: (866) 595-6470

Ralph`s Glass Shop ★★★★★

Automobile Parts & Supplies, Plate & Window Glass Repair & Replacement, Windshield Repair
Address: 220 East St, Texarkana
Phone: (870) 773-4159

Posey`s Service Center ★★★★★

Auto Repair & Service, Auto Oil & Lube, Truck Service & Repair
Address: 104 E South St, Haskell
Phone: (501) 778-8285

Auto blog

Diesel Power finds the ultimate modified oil-burner

Sat, 24 Aug 2013

For nine years, Diesel Power magazine has run the Diesel Power Challenge, this year's grindfest being "a week-long torture test that features seven events, nine trucks, 8,000 horsepower, and nearly 15,000 pound-feet of torque." The road to being crowned "the most powerful truck" starts with a dyno run, and then continues through the completion of a CDL-style obstacle course, an eighth-of-a-mile drag race while towing a 10,000-pound trailer, a quarter-mile drag race without a trailer, a fuel economy test in the mountains and finally a sled-pulling test through a 300-foot-long packed-mud pit.
What kind of trucks get into such a fight? Last year's winner, for instance - who upgraded his truck this year to prove he didn't "luck into the win" - drives a 2008 Ford F-250 Super Duty with a 6.4-liter Power Stroke V8 upgraded with a custom intake, Elite Diesel triple turbos and a two-stage nitrous system. Another competitor has a 2005 Dodge Ram 2500 powered by a 5.9-liter Cummins inline-six, upgraded with Garrett turbos, dual-stage nitrous, a seven-inch exhaust stack and twin fans built into the bed to cool the Sun Coast Omega transmission. The numbers on that truck: 1,255 horsepower, and 2,063 pound-feet of torque at the wheels. Naturally, as the image above might suggest, things don't always end well.
You'll find all five videos covering this years challenge below. A scene in the dyno video sums it all up perfectly: a competitor leaves his nitrous on too long and the crew is treated to some ominous poppings, he leans out the window, throws both hands up and shouts, "Amer'ca!"

Weekly Recap: An '80s encore in the auto world

Sat, Jul 11 2015

The '80s returned in a big way this week, as National Lampoon's, Ghostbusters, Miami Vice, and even Tetris were back in the news. While there were far more serious topics (see below), nostalgia mingled with modern marketing to put these Reagan-era favorites back in the spotlight. The '80s were alternately cold and corny at times, but their cultural touchstones can still generate big money. That's why Infiniti recreated an iconic scene from National Lampoon's Vacation (1983) for an advertisement that hawks the QX60 crossover. Actor Ethan Embry, who played Rusty Griswold in a later Lampoon's movie, pilots the Infiniti – which is serving as a modern Family Truckster – for a trip to Walley World. A blonde pulls alongside in a red Lamborghini. They flirt, and she drives on. Christie Brinkley, who played the original girl in the red sports car (she drove a Ferrari in the '83 flick), is riding shotgun and chides Embry with: "A blonde. In a convertible. Seriously?" Okay, it's hardly on the level of "here's looking at you," or even "you can't handle the truth," but it should resonate with '80s babies, many of whom are now having children of their own and moving into three-row SUVs like the QX60. Naturally, Hollywood is going back to the well, too, with a Vacation remake that premiers July 29. Meanwhile, Ghostbusters is returning next year, and director Paul Feig offered a peak at the new Eco-1 in this tweet. In the 1984 classic, the team drove a modified 1959 Cadillac. Now, it will drive a late '80s Cadillac. As expected, the announcement generated support and controversy from movie and car enthusiasts. His tweet had generated several thousand retweets and favorites in the days following the news. Though the '80s Caddy looks, uh, less elegant in comparison to the now-iconic fins and curves of the original Ecto-1, it's about the same time lapse into the past as the '59 Caddy was to viewers in 1984. Speaking of 1984, Miami Vice, which debuted that year on NBC, is seeing one of its hero cars hit the auction block, Mecum Auctions announced this week. The 1986 Ferrari used on the show will be offered for sale Aug. 15 during Monterey classic car week. The white supercar runs a 390-hp flat 12-cylinder engine paired with a five-speed manual transmission and was in storage after the show ended in 1989 until earlier this year. It has 16,124 miles on the odometer and is authenticated by Ferrari North America and Classiche.

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

Mon, 08 Jul 2013

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.