1971 FORD BRONCO WITH HARDTOP OUT OF AN ESTATE BEEN STORED 10 TO 15 YEARS.302 V8 3 SPEED TRANS.RESTORED IN THE EARLY 1980S.NEW TIRES AN WHEELS .CARPET. NEW BRAKES.GAS LINES AN REBUILT CARB.RUNS AN DRIVES GREAT. MINOR RUST BUBBLES ON ONE ROCKER. AN ON INSIDE BOXES UNDER DOOR EASY FIX.PAINT IS OLD BUT GOOD. TRIM IS ALSO GOOD.4X4 AN ALL MACHICALS GOOD.ALWAYS A LOCAL GA TRUCK. HARDTOP IN GOOD CONDITION REAR DOOR WORKS GOOD.BUMPERS AN TRIM ARE GOOD.CALL WITH QUESTIONS OR OFFERS.770 535 7311 SOLD WITH GA REGISTRATION AND BILL OF SALE
|
Ford Bronco for Sale
Auto Services in Georgia
ZBest Cars ★★★★★
Woods Automotive ★★★★★
Wellington Auto Sales ★★★★★
Volvotista ★★★★★
US Auto Sales - Covington ★★★★★
US Auto Sales ★★★★★
Auto blog
Junkyard Gem: 1973 Mercury Marquis Brougham 4-Door Pillared Hardtop
Tue, Nov 7 2023Ford's Mercury Division debuted the Marquis in the 1967 model year, as a sporty coupe based on a stretched Ford LTD chassis. When the LTD got an update for 1969, so did the Marquis, and production of that generation of the top-of-the-line Mercury continued through 1978 (the Grand Marquis hit streets the following year). The 1969-1978 Marquis was a big, imposing land yacht, and the Brougham version came absolutely loaded with affordable luxury. Today's Junkyard Gem is a Marquis Brougham from the first year of the Malaise Era, found in a Phoenix self-service car graveyard recently. This car appears to have spent decades sitting outdoors in one of the harshest climates in the country, and so it's in rough shape. The vinyl top received the full thermonuclear treatment and is mostly obliterated by now. The interior got thoroughly cooked as well. Still, its original opulence shines through if you use some imagination. What hurts is that this car was packed with most of the good options, including the mighty 460-cubic-inch (7.5-liter) V8 engine with four-barrel carburetor. The price for the 460 was just $76 in this car, or around $548 in today's money. The base engine was a 429 (7.0-liter). Power numbers were way down for 1973 when compared to a couple of years earlier, partly as the result of tightening emissions standards but mostly due to the switch from gross to net power ratings that began midway during 1971 and was completed by the end of 1972. This engine was rated at 202 horsepower and 330 pound-feet. The only transmission available was a three-speed automatic. We can assume that the original buyer of this car and its single-digit fuel economy had a rough time when the OPEC oil embargo hit in the fall of 1973. Believe it or not, air conditioning was not standard equipment on the '73 Marquis Brougham (you had to move up to a Lincoln for that). This one even has the automatic temperature control feature, adding a total of $508 to the cost of this car (about $3,661 in 2023 dollars). That AM/FM/8-track radio—or, in fact, any radio—was an extra-cost option as well, with a price tag of $363 ($2,616 after inflation). The MSRP for the 1973 Marquis Brougham sedan (known as a "pillared hardtop" thanks to the frameless window glass) was $5,072, which comes to $36,555 in today's dollars. Obviously, its out-the-door cost would have been much higher with all the options.
Chrysler called out over lackluster Ram Runner by racer who helped develop it
Fri, 11 Apr 2014Fans of off-roading and desert blasting might recall that Chrysler offers an aftermarket conversion that can turn a Ram 1500 into a road-legal desert racer, called the Ram Runner. The kit, sold through Mopar, includes some significant suspension upgrades, body tweaks and a brawnier cat-back exhaust for the truck's 5.7-liter V8.
Considering all of this, comparisons with the almighty Ford F-150 SVT Raptor are common. Among the off-road community, that makes these two a sort of Chevrolet Camaro and Ford Mustang for people that prefer driving on dirt. In the Race-Dezert forum, the discussion as to which truck was better was proceeding as normal - Ram fans said their piece and Ford fans said theirs. Then, a man named Kent Kroeker offered up his two cents.
See, Kroeker is a Baja racer, and the man that helped develop the Ram Runner. Despite his association with the truck, though, he had some less than kind words for Chrysler and the Ram Runner.
This is what a 3D-printed liquid metal Ford Torino looks like
Sat, 12 Oct 2013Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.