1968 Ford Bronco Fiberglass Body 351w Auto... Easy Project In N.c. on 2040-cars
Harrisburg, North Carolina, United States
Vehicle Title:Rebuilt, Rebuildable & Reconstructed
Engine:5.0L 4949CC 302Cu. In. V8 GAS OHV Naturally Aspirated
Fuel Type:GAS
Mileage: 99,999
Make: Ford
Number of Cylinders: 8
Model: Bronco
Trim: Roadster Sport Utility 2-Door
Drive Type: U/K
AS PICTURED A NICE EASY TO COMPLETE PROJECT BRONCO .This Bronco was purchased as is at the local C0-PART auction.Some one has put a ton of money in this one it is all fiberglass tub and tilt front end. I purchased it and had the rear fiberglass repaired ..thats all I have done with it ......other out of town construction projects have consumed my time.It comes with a 1968 ford Virginia reconstructed vehicle title with no liens ..It does run and drive and the trans and engine acts strong ..something makes a clunk noise in the drive train maybe a universal? ....the paint is really pretty good for a driver .plus the top and alot of the parts on this BRONCO looks to be new ..The interior and guages are nice as well . SOLD AS IS .. I feel it will need to be trailered to its new home..... although I have been driving it around the neighborhood like a golf cart.... .Please come and inspect before bidding ...Give me a call ..Thanks 704-200-0334
Ford Bronco for Sale
Auto Services in North Carolina
Your Automotive Service Center ★★★★★
Whistle`s Body Shop ★★★★★
Village Motor Werks ★★★★★
Tyrolf Automotive ★★★★★
Turner Towing & Recovery ★★★★★
Triangle Auto & Truck Repair ★★★★★
Auto blog
Recharge Wrap-up: Ford 1.0L EcoBoost a hit in Europe; Build a tiny inverter, win $1 million
Mon, Aug 11 2014In Europe, Ford's 1.0-liter EcoBoost engine is the best-selling turbocharged gasoline engine. The three-cylinder motor powers 20 percent of new Fords sold in Europe. Earlier this year, it won its third International Engine of the Year award, and between January and June, it was sold in about 120,000 cars. So far this year, 38 percent of Fords sold in the Netherlands, 35 percent in Denmark and 32 percent in Switzerland have been powered by the 1.0-liter EcoBoost. The engine's turbocharger spins at 248,000 rpm, and provides 24 psi of pressure. The engine produces up to 138 horsepower, depending on the version. Read more in the press release below. When lithium-ion battery packs are retired from the road, remanufacturing, repurposing, and recycling are worthwhile options, according to a study by Mineta Transportation Institute. The study included a cost-benefit analysis of those three options, and found remanufacturing to be the best route. To get the most out of them, batteries should be tested and have their damaged cells replaced then put back to use. Repurposing is the second best option, using the remaining available charge for something besides cars. Recycling on its own isn't profitable, but it could make economic sense with "increased technological breakthroughs." Learn more at Recycling International or download the report here. A smaller inverter for EVs can win you $1 million. The Little Box Challenge is an open competition to build a power inverter with a density of at least 50 watts per cubic inch. Google and the Institute of Electrical and Electronics Engineers (IEEE) are offering the hefty prize to the team that builds the inverter with the highest power density within an enclosed volume of 40 cubic inches. Teams must register by September 30. Read more at Green Car Congress or learn more at the Little Box Challenge website.
Ford Mustang Shelby GT500 has a bit of a dyno issue
Tue, 28 May 2013We're of the mind that each and every dyno should come with Murphy's Law painted in big, visible letters down the side. For every ten successful dyno runs out there, it seems there's one where events to horribly wrong. Take, for example, the video below. The clip shows what happens when a Ford Shelby GT500 and a mobile dyno have a bit of a disagreement at the Performance Expo 24 in Sherbrooke, Quebec. We won't spoil the results for you, but we will say there's some substantial carnage involved.
It's unclear just how much damage ensues from the dust up or whether anyone was harmed in the incident, but from the looks of things, everyone made it out without serious injury. If only we could say the same for the machines involved. Check out the video below.
Car Stories: Owning the SHO station wagon that could've been
Fri, Oct 30 2015A little over a year ago, I bought what could be the most interesting car I will ever own. It was a 1987 Mercury Sable LS station wagon. Don't worry – there's much more to this story. I've always had a soft spot for wagons, and I still remember just how revolutionary the Ford Taurus and Mercury Sable were back in the mid-1980s. As a teenager, I fell especially hard for the 220-horsepower 1989 Ford Taurus SHO – so much so that I'd go on to own a dozen over the next 20 years. And like many other quirky enthusiasts, I always wondered what a SHO station wagon would be like. That changed last year when I bought the aforementioned Sable LS wagon, festooned with the high-revving DOHC 3.0-liter V6 engine and five-speed manual transmission from a 1989 Taurus SHO. In addition, the wagon had SHO front seats, a SHO center console, and the 140-mph instrument cluster with mileage that matched the engine. When I bought it, that number was just under 60,000 – barely broken in for the overachieving Yamaha-sourced mill. The engine and transmission weren't the only upgrades. It wore dual-piston PBR brakes with the choice Eibach/Tokico suspension combo in front. The rear featured SHO disc brakes with MOOG cargo coils and Tokico shocks, resulting in a wagon that handled ridiculously well while still retaining a decent level of comfort and five-door functionality. I could attack the local switchbacks while rowing gears to a 7,000-rpm soundtrack just as easily as loading up on lumber at the hardware store. Over time I added a front tower brace to stiffen things a bit as well as a bigger, 73-mm mass airflow sensor for better breathing, and I sourced some inexpensive 2004 Taurus 16-inch five-spoke wheels, refinished in gunmetal to match the two-tone white/gunmetal finish on the car. That, along with some minor paint and body work, had me winning trophies at every car show in town. And yet, what I loved most about the car wasn't its looks or performance, but rather its history. And here's where things also get a little philosophical, because I absolutely, positively love old used cars. Don't get me wrong – new cars are great. Designers can sculpt a timeless automotive shape, and engineers can construct systems and subsystems to create an exquisite chassis with superb handling and plenty of horsepower. But it's the age and mileage that turn machines into something more than the sum of their parts.