on 2040-cars

Auto blog

2013 Dodge Challenger R/T hits the Redline

Dodge has added a bit of spice to its Hemi-powered Challenger for 2013, offering up this new Redline package that makes its official debut at the Chicago Auto Show. The R/T Redline builds on the Rallye Redline kit that was created for the V6 Challenger, and we like how these subtle changes add to the muscle coupe's already classic styling.
In addition to the black chrome 20-inch wheels with red accents, the R/T Redline adds subtle graphics along the beltline. Inside, cars equipped with the six-speed manual transmission get a performance tuned exhaust that allows the engine to send a full 375 horsepower and 410 pound-feet of torque to the rear wheels. (Redline Challengers with the five-speed automatic produce 372 hp and 400 lb-ft.)
The Redline package retails for $1,995 and can be had on both Challenger R/T and R/T Plus models. Scroll down for the full press blast.

Hellcat no help to Fiat-Chrysler's bottom-of-the-pile mpg average

What, you expected the "fastest muscle car ever" to help fleetwide fuel economy? Nope, don't think that's going to happen. That means Fiat Chrysler will likely to continue to languish at the bottom of the heap when it comes to fleetwide fuel economy among the largest automakers serving the US, especially as the automaker starts to sell its Dodge Challenger SRT Hellcat. A few hundred Fiat 500E electric vehicles aren't going to turn the trend around. See, Chrysler has once again finished at the bottom of the list when it came to fleetwide fuel economy among automakers for 2014 model-year vehicles, according to a preliminary study by the US Environmental Protection Agency. Chrysler and Fiat had an average of 21.1 miles per gallon. That substantially lagged the overall 24.2 mpg average, but it was an increase from the company's 20.9 mpg average last year and the 20.1 mpg average two years prior. For 2014, General Motors had the second-worst fleetwide fuel economy at an even 22 mpg. Fiat Chrysler does say it's working on improving its fuel economy, according to Automotive News. The company plans on making its inline-four-cylinder and V6 engines smaller, and will sell more vehicles with eight- and nine-speed transmissions. Heck, there's even a plug-in hybrid version of the Chrysler Town & Country minivan in the works for late 2015, and the company can tout fuel-efficiency gains with the Chrysler 200 and Jeep Cherokee. We would be remiss if we didn't note that, compared to its muscle-car forefathers, the Hellcat actually performs pretty well at the pump. Last month, word got out that the 2015 Challenger Hellcat, equipped either with a six-speed manual or an eight-speed automatic transmission, got a combined fuel economy of 16 mpg. Heck, the automatic-tranny version got 22 mpg on the highway. And that's for a car with 707 horsepower and a 10-second quarter-mile time. Still, with the pedal floored, the car can burn a gallon and a half of fuel per minute. Ouch.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat