Dodge Sprinter 2500 144"wb Diesel Cargo Cold A/c Cruise Autocheck No Reserve on 2040-cars

Auto blog

Dodge Charger to slim down and run turbo four in next generation

The current Dodge Charger is getting long in the tooth. It was originally introduced in 2005 as a 2006 model. In car terms, that's an eternity, though it's been refreshed twice. Still, FCA US will keep the LX-generation car going, reportedly facelifting it one last time for 2019. After that, there are some bigger changes in store . Automotive News is reporting that the follower to the current LX Charger will lose almost 500 pounds and will once again offer a turbo four-cylinder. You might remember the front-wheel-drive four-banger Charger of the early '80s. The recharged sedan will be twin-turbo and it's going to use the 300-horsepower four-cylinder engine currently under development for the 2018 Jeep Wrangler, AN says. The target weight for the future car is around 3,500 lbs, while the current car has a curb weight of nearly 4,000 lbs. Look for it to arrive in the early 2020s. The new platform will have a touch of Italian flair instead of the Daimler-Benz flavor embedded deep inside the LX cars. It will be built on an extended version of the 2017 Alfa Romeo Giulia's "Giorgio" platform, according to AN. Dealers were already shown a styling-buck almost a year ago. Related News: Featured Gallery 2015 Dodge Charger R/T View 42 Photos News Source: Automotive NewsImage Credit: AOL Alfa Romeo Dodge Future Vehicles Sedan FCA

Takata adds millions to recall expansion in US [UPDATE]

UPDATE: Ford spokesperson Kelli Felker has advised Autoblog that of the 1,509,535 total vehicles worldwide that the company is recalling, 966,504 of them are new additions for this expanded safety campaign. Last week, the National Highway Traffic Safety Administration announced that the Takata airbag inflator recalls would expand to an estimated 33.8 million vehicles in the US. However at the time, automakers weren't sure specifically which of their models might be affected under this enlarged campaign. Now, the numbers for BMW, FCA, Ford, and Mitsubishi are being released by the agency. Additionally, Honda is outlining the broadening of its own campaign. BMW's recall amounts to 420,661 vehicles in the US, an increase from 140,696 previously. All of the following models need their front, driver's side airbag replaced: 2002-2005 BMW 325i/325xi/330i/330xi Sedan 2002-2005 BMW 325xi/325i Sportswagon 2002-2006 BMW 330Ci/325Ci/M3 Convertible 2002-2006 BMW 325i/330i/M3 Coupe 2002-2003 BMW M5/540i/525i/530i Sedan 2002-2003 BMW 540i/525i Sportswagon 2003-2004 BMW X5 3.0i/4.4i BMW has received no reports of any injures or deaths from this problem in its vehicles. FCA has 5,224,845 vehicles globally in need of inflator replacements, according to its statement. However, the company is only aware of one injury related to the issue, which occurred in a 2006 Dodge Charger in southern Florida. There are 4,747,202 vehicles worldwide from the company that are affected on the front, driver's side. Among these, 4,066,732 are in the US, 374,508 are in Canada, and the rest are in other countries. The models are: 2005-2009 Dodge Ram 2500 Pickup 2004-2008 Dodge Ram 1500 Pickup 2006-2009 Dodge Ram 3500 Pickup 2007-2009 Dodge Ram 3500 Cab Chassis 2008-2010 Dodge Ram 4500/5500 Cab Chassis 2008-2009 Sterling 4500/5500 Cab Chassis 2004-2008 Dodge Durango 2007-2008 Chrysler Aspen 2005-2010 Chrysler 300/300C/SRT8 2005-2010 Dodge Charger/Magnum 2005-2011 Dodge Dakota 2006-2010 Mitsubishi Raider Also, there are 438,156 vehicles in the US, according to the NHTSA documents, that need their front passenger's side inflators replaced in the expansion of an earlier regional recall: 2003 Dodge Ram 1500 2003 Dodge Ram 2500 2003 Dodge Ram 3500 The total number of vehicles from Ford now covered under these campaigns stands at 1,509,535 worldwide. Of this total, there are 1,380,604 in the United States, 93,207 in Canada and 16,953 in Mexico.

New Viper 'is a possibility,' Sergio Marchionne says

It was thought the door to the future for the Dodge Viper had closed last year, but Fiat Chrysler CEO Sergio Marchionne reopened it during his press conference at the 2016 Detroit Auto Show. Marchionne said the current Viper is the only FCA product to use the ZD platform, which "doesn't make sense to me." Yet, "given the architectural development within the brand, there is a possibility that a new version of the Viper may surface." Automobile reports that the company uses a versatile, rear- and all-wheel drive Giorgio platform for Alfa Romeo and Dodge. It will support the Alfa Romeo Giulia (Alfa Romeo's larger BMW 5 Series competitor), the next-generation Dodge Challenger, Charger, and rumored Barracuda, and it could support a new generation of Viper. We're probably talking about a different kind of Viper, though, with Automobile saying, "the current car's truck-based V-10 no doubt would be scrapped along with its platform." A Viper without a V10 doesn't seem like a Viper to us, but we'll wait to see what happens. In the midst of contract negotiations for a new labor agreement between FCA and the United Auto Workers last year, it emerged that the Conner Avenue Assembly plant that builds the Viper hadn't been given any new product after the end of Viper build-out in 2017. That led most to reason that the current Viper would be the end of the 25-year run of America's hairiest sports car. How long we'll be waiting is unknown. Marchionne had no timetable and admitted that a future Viper might not appear on the heels of the current one. With a renewed commitment to being debt-free by 2018, FCA is likely more focused on getting Alfa Romeo running properly and cranking out the volume variants for the Giorgio platform first. Related Video: Featured Gallery 2014 SRT Viper GTS: Review View 36 Photos News Source: Automobile via World Car FansImage Credit: Copyright 2015 Drew Phillips / AOL Detroit Auto Show Dodge Coupe Performance Sergio Marchionne FCA conner avenue assembly plant