2004 Dodge Sprinter 2500 158" High Roof Fully Loaded Serviced on 2040-cars

Auto blog

Chop the top of your new Dodge Viper for $35,000

We have good news, and we have bad news. First, the good: It's now possible to get a brand-new Dodge Viper roadster, which is nice, considering we're in the dead of summer and many of us like wind-in-the-hair motoring. Now, the bad: This is not a factory option from the automaker, instead coming courtesy of an aftermarket company called Prefix Performance, and that means it's going to cost you some serious coin.
Called Medusa, this drop-top Viper was created without the knowledge or consent of Dodge, but that's probably fine because Prefix works with the automaker already for the final preparation of the American supercar, including paint. According to the company, the current, fifth-gen Viper was built with a convertible version in mind, so no chassis strengthening is required. From the looks of the somewhat grainy photos available, the conversion appears of very high quality.
Want one? Well, that means you're going to need to procure a Viper - Prefix has 10 units ready for transformation as it stands - and that's going to cost at the very least $102,485. Then, you'll need to write a check for an additional $35,000 for Prefix to surgically remove the car's roof. Thing is, for that kind of cash, a prospective owner could buy, among other very nice options, a Viper hardtop and a loaded Miata, or a Corvette Stingray convertible and several pockets full of change. Or, perhaps a new Viper hardtop and a used, first-gen Viper convertible?

Dodge Dart pushed toward the grave with simplified lineup

FCA announced a while back that the Dodge Dart and its Chrysler 200 half-sibling are on the way out due to lack of interest. The 2016 model year will be the Dart's last, and Dodge has just reconfigured the lineup mid-year to lower (relative) pricing and streamline ordering. Streamlined is a nice way of saying there will be fewer choices, with three models (down from five) and limited customization beyond choosing the paint color. The odd thing is that the Dart continues to offer three different engines. And while the prices of the individual models have decreased, the former SE base trim is now gone. That means an early-2016 Dart was available for as little as $17,990, while the late-2016 Dart starts at $18,990. For that sum you get the new base model, the SXT Sport, which replaces the SXT and comes with the 2.0-liter Tigershark four-cylinder (160 horsepower, 148 lb-ft of torque) and a six-speed manual; a six-speed automatic is an available option. Standard equipment includes normal entry-level car stuff, black cloth upholstery, 16-inch wheels, and grille shutters that help improve fuel economy. The SXT Sport can be dressed up with one of three different appearance packages; Chrome adds bright accents to parts including the grille and door handles, Rallye has a black grille and a touring suspension, and the Blacktop package makes pretty much everything on the exterior black and includes a sport-tuned suspension. All three packages come with bigger wheels, too. From there it's on to the new Dart Turbo, for $20,490. It comes with the 1.4-liter turbo four (160 hp, 184 lb-ft of torque) and comes exclusively with a six-speed manual transmission. This is supposed to be the model for enthusiasts, which is how Dodge is selling the switch to manual-only. Ditching the disliked dual-clutch automatic that was previously offered with this engine doesn't hurt. This engine was also used in the former Aero model, as it's the most fuel-efficient in the lineup. The Turbo gets the Rallye appearance stuff and a different hood. At the top is the Dart GT Sport, starting at $21,900. It has the 184-hp, 2.4-liter Tigershark four-cylinder and a choice of six-speed manual or automatic transmission. This is the one with features, including a power driver's seat, the 8.4-inch Uconnect infotainment unit, digital reconfigurable gauges, dual-zone auto climate, keyless start, and a rearview camera. The latter-part-of-2016 Dart will be available in eight colors.

FCA seeks partner to keep building Dodge Dart, Chrysler 200

Mere weeks after FCA announced it was shutting down production of the Dodge Dart and Chrysler 200, new hope emerges to give the sedans a stay of execution. Speaking at the Geneva Motor Show last week, Sergio Marchionne said that the company was looking for a partner "who is better at it than we are and who has got capacity available" in order to continue building the models on its behalf. "There are discussions going on now," said Marchionne, according to Motor Trend. "I think we will find a solution. We continue to talk. It's both a technical solution and an economic one. We need to find a solution that works economically." Contracting vehicles to be manufactured offsite is more common practice among European automakers than it is with American ones. Chrysler's former patron Mercedes, for example, has the G-Class built for it by Magna Steyr in Austria, the A-Class by Valmet in Finland, and the R-Class by AM General in Indiana (even though it's no longer sold in the US). This arrangement would, on the surface at least, appear more similar to the deal that Toyota struck with Mazda to build the Scion iA, drawing on the contractor's expertise and capacity to build the small sedan on the client company's behalf. Only rather than basing a new model on one of the partner's existing ones, this deal would ostensibly continue building FCA models on FCA platforms using FCA components. We'll have to wait to find out with whom FCA strikes up the manufacturing deal, but we wouldn't be surprised to see Marchionne turn to a partner he already knows. The company is, after all, at the center of an intricate web of joint ventures and manufacturing contracts. The Fiat 124 Spider, for example, is built by Mazda. The Fiat Sedici that preceded the 500X was built by Suzuki. Models like the Dodge Stealth and Eagle Talon were built in Illinois at the Diamond-Star Motors joint venture before Mitsubishi took it over altogether. And Dodge continued selling the Mercedes-made Sprinter long after DaimlerChrysler split. The Ram ProMaster, though built by FCA in Mexico for the North American market, stems from a partnership in France with PSA Peugeot Citroen. And the ProMaster City is built in a joint-venture plant in Turkey, from which it's also sold by GM as an Opel in Europe and a Vauxhall in the UK. With all those deals coming and going, after all, what would one more add to the complexity?