2012 Dodge Ram 3500 Diesel 4x4 Dually Laramie Mega Navigation Sunroof Texas on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge celebrates big B-day with 100th Anniversary Editions muscle cars

Being in business for 100 years is a HUGE milestone, so we hope Dodge has more in mind to celebrate its centennial than just a special edition package for the 2014 Charger and Challenger. Called the 100th Anniversary Edition package, this collection of cosmetic enhancements will be available in limited quantities for both cars at a cost of $2,500.
Ordering a Charger or Challenger with the 100th Anniversary Edition package means starting with either a V6-powered SXT Plus or V8-powered R/T Plus model. They can each be ordered in many colors, but only the High-Octane Red Pearl Coat above is an anniversary exclusive. Each car also comes with an anniversary-exclusive set of 20-inch, five-spoke wheels with what Dodge calls "Granite Crystal pockets," a texture that's also mirrored on each car's grille.
Of course, there are commemorative badges galore affixed to the exterior of each car, including "Dodge Est. 1914" fender badges and "100" logos on the center caps of each wheel. The styling theme of each car's interior is a bit more interesting, with Dodge designers trying to evoke "the patina and machinist legacy of John and Horace Dodge," the company's founders. To that end, the leather interior can be had in Molten Red or Foundry Black Nappa, and each features a custom cloud overprint that makes the hide look like a working man's dirty dungarees. Designers also used brass-colored accent stitching on the interior's leather trim pieces, and affixed more "Dodge Est. 1914" badges to the front seat backs and floor mats. We do like the flat-bottomed steering wheel, and the Challenger 100th Anniversary Edition gets exclusive white gauges faces and the Charger black. The "100" on each car's speedometer is also highlighted in red.

Cruiser's close call caught on camera

A new recruit to the Kansas Highway Patrol experienced his first brush with danger on his first day when a semi truck clipped his cruiser during a traffic stop last week. Public relations officer Tod Hileman said in a Facebook post that the incident occurred when an officer and his brand-new trainee pulled over a black Dodge Charger on I-70 in Trego County, Kansas. Hileman said in the comments that the cruiser was parked two feet away from the white line on the shoulder. Not only did the driver not get over a lane when he saw the stopped cruiser per Kansas law, he seemed to have moved closer to the side of the road. The big rig managed to send the cruiser's side mirror and spotlight flying across the road. The truck could have easily injured one of the officers, perhaps fatally. The truck driver ignored Kansas' Move Over law, which requires "drivers approaching a stationary emergency vehicle displaying flashing lights, including towing and recovery vehicles, traveling in the same direction, to vacate the lane closest if safe and possible to do so, or slow to a speed safe for road, weather, and traffic conditions." With a clear lane to his left the trucker in this case had no excuse. He stopped after the crash and was cited by the officers for failing to change lanes when he saw the stopped vehicles. Being a cop is a risky job. So far this year, 28 officers have lost their lives in the line of duty due to car accidents, according to the Officer Down Memorial Page. News Source: Facebook Government/Legal Dodge Videos traffic traffic stop traffic tickets move over law