2006 Dodge Ram 3500 Quad Cab Dually 5.9 Diesel-4x4-six Speed Manual-no Reserve on 2040-cars

Auto blog

Mopar teases four of 'nearly 20' SEMA Show concepts

Yesterday it was Chevrolet. Today, Mopar has dropped some SEMA knowledge, releasing a quartet of teaser images that give us some indication of what kind of cars, trucks, and crossovers Fiat, Chrysler, Dodge, Jeep, and Ram will be showing in Las Vegas. Like Chevy, Mopar's concepts utilize both production and concept accessories, although Fiat Chrysler has gone a bit more indepth on at least one of its concepts. Immediately, the most tantalizing teaser is the one shown above. Yes, that's the back of a Challenger, and aside from the bright orange accents on the gray body, you should take notice of the badge mounted on the spoiler – yes, that says "GT AWD." To be honest, such a vehicle wouldn't be a huge shock, as both the Challenger's LX platform-mates, the Dodge Charger and Chrysler 300, are offered with all-wheel-drive options. Still, adding such a vehicle to the production cycle would give Dodge a leg up on the rear-drive only Ford Mustang and Chevrolet Camaro. Aside from that concept, FCA has also released teasers of a Ram-based concept, a 300-based concept, and what we're guessing is a Fiat 500X. We can't wait to see what the actual Fiat concept has to do with kiteboarding. As for the 300 and Ram, there's not a lot of hints on what sort of styling details they'll contain. The Chrysler has additional LED accents and what we're guessing is matte blue paint, while the Ram is based on a Hemi-powered 1500 with Rebel styling cues. This is just a very tiny sample of Mopar's final SEMA roster, which include "hundreds" of parts. There should also be a total of 20 vehicles covering all four former Chrysler Group brands, as well as Fiat. Naturally, we'll have plenty to report on each vehicle once the SEMA show kicks off in the next couple weeks.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Rare Dodge Shelby Dakota is a very '80s sport truck

The late-great Carroll Shelby built an incredibly successful career of making all sorts of cars faster, more often than not, with a bigger or more potent engine under the hood. The icons are well known—legends like the Shelby Cobra, GT350 Mustang, and the big GT500. But by the 1980s, Shelby was plying his trade over at Chrysler, at the behest of chairman Lee Iacocca, churning out special editions like the Dodge Shelby Charger, zippy CSX, rorty GLHS, and this—the 1989 Shelby Dakota muscle truck. 1,500 of these racy pickups were built for just one year and a whole two-and-a-half decades later they still turn heads. This one especially. The spotless pickup recently turned up for sale online , and its odometer reads a claimed 25,307 miles. So what makes these rarified work trucks special? As with most Shelbys, it starts under the hood. Up until 1989, the standard Dodge Dakota pickups were offered in only four-cylinder and V6 variants. But Dodge (and Shelby) wanted more, so the larger 5.2-liter Magnum V8 from Dodge's full-size pickup was shoehorned into the midsize Dakota, albeit not effortlessly. To fit, Dodge had to swap the V8's belt-driven fan for an electric unit mounted in front of the radiator. That did the trick, as well as earned the V8 a few extra ponies, pushing the special Dakota up to 175 horsepower and 270 lb.-ft. of torque. That performance may sound paltry by today's standards, but in 1989 it was seen as quite sporty, and netted a zero to 60 mph dash in 8.5 seconds. A four-speed automatic with lockup torque converter transmitted that power to the rear wheels. Additional Shelby performance goodies included a limited-slip differential, transmission cooler, along with a host of eye-catching body mods, including a unique air dam and bumpers, Shelby floor mats, monogramed seats and door panels, a "CS" steering wheel, 15-spoke hollow alloy wheels, and shouty body graphics. While the Shelby Dakota didn't return for 1990, its V8 legacy did continue, and in 1991 the 5.2-liter eight-cylinder became an option on new Dakotas. Of the 1,500 Shelby Dakota pickups built, 860 were dressed in red while a rarer 640 came adorned in Bright White. This '89 is said to be #245 of those white trucks, sold new to its original (and sole) owner in Mechanicsburg, Pennsylvania, for $15,985 (the Shelby package cost $3,933 in its day). Currently, it's demanding bids north of $10,000 for its low-mileage originality. Related Video: This content is hosted by a third party.