1999 Dodge Ram 3500 on 2040-cars

Auto blog

2015 Dodge Viper GTC available in 25 million no-cost combos with 1 Of 1 bespoke program

What's the one thing no car can have too much of? Here's a hint – it's not power. It's not efficiency, either, or technology, or even safety. It's exclusivity. It's one reason Rolls-Royce has become a legend building absolutely bespoke motor vehicles, and it's the reason Dodge, of all companies, is offering a new GTC trim level for its Viper supercar. Now, you might be asking what's so special and exclusive about a trim level? Well, in the Viper GTC's case, it gives owners access to a catalog of 8,000 shades of paint for the exterior, 24,000 "hand-painted" custom stripe patterns, 10 different wheel options, 16 interior trims and no fewer than six aerodynamic packages. That results in 25 million different configurations for the 645-horsepower snake. Most shockingly, the customization choices come at no additional cost on the GTC model. And it's only the start. Ordering a GTC will enroll customers in a unique VIP program called Viper Concierge, which according to Dodge, "offers an exclusive point of contact throughout the custom Viper build process." In other words, buyers will be given the means to stay right on top of their car's production, through the 140-to-160-hour painting process, which itself will be fully documented with pictures and through a mobile-friendly website, to the actual construction of their GTC. The Concierge process will start with the ordering stage, which will include Dodge sending customers a paint chip showing the owner's custom choosing, which they can confirm or refuse. Shortly thereafter, Dodge will send buyers a 1:18-scale "speed-form" replica in their chosen custom colors, once again to confirm or deny the build. Once the buyer's color and option selection is locked-in, that car becomes a one-of-one Viper for that year – no other buyer will be permitted to build a Viper to the same specifications. The concierge service also grants access to the Viper Ambassador Owner's Portal, where orderers can track their car's build process, receive weekly updates and share their excitement with (jealous) friends and family. And once the car is complete, it will be fitted with a custom dash plaque identifying its bespoke provenance – the owner can choose to have their name put on the badge, the car's nickname, or whatever they wish (Dodge will also ship each Viper with a second blank plate to include if the original owner sells the car).

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

FCA and UAW deal could mean huge production shakeups

The big labor contract between Fiat Chrysler Automobiles and the United Auto Workers is likely to lead to some very serious production shakeups across the company's North American manufacturing operations. That's according to a new report from Automotive News, which details the sweeping changes at no fewer than five production facilities in Michigan, Illinois, Ohio, Mexico, and Poland. So without further ado, here's what's going where, presented in easy to digest bullet form. Ram 1500 production would move from Warren, MI to Sterling Heights, MI Warren, MI would be retooled for unibody production and would handle the Jeep Grand Wagoneer and could potentially build Grand Cherokees to ease the strain on Detroit's Jefferson North factory Chrysler 200 production would move from Sterling Heights, MI to Toluca, Mexico Dodge Dart production would move from Belvidere, IL to Toluca, Mexic Fiat 500 production, which is currently handled by Toluca, would be concentrated in Poland, where the Euro-spec Cinquecento is built Jeep Cherokee production would move from Toledo, OH to Belvidere, IL to make room for Wrangler and Wrangler Pickup production Like we said, those are some big changes. But, as FCA CEO Sergio Marchionne said in an earlier interview with Automotive News, this kind of shakeup would make a lot of sense. In that August interview the exec said that automakers moved truck production to Mexico because they were "threatened" by the UAW. "The only thing [the UAW] want is to move the truck back. Which is right. If you move the truck back here, which is [the UAW's] domain, [and move] all the cars that we get killed on somewhere else, we could actually make sense of this bloody industry and actually increase the number of people employed in this country and really share wealth because we are making money," Marchionne told AN. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA toluca warren sterling heights