Ram 2500 Mega Cab, White With Grey Leather, Very Good Condition on 2040-cars

Auto blog

Tesla Model S P85D shows 707-hp Dodge Challenger Hellcat how to drag race

Street Car Drags hosted a bang-up event at the Palm Beach International Raceway last weekend, with a list of massive horsepower ICE cars going up against one another and a trio of Tesla Model S P85Ds. One of those duels pitted the 691-horsepower Tesla against a 707-horsepower Dodge Challenger SRT Hellcat, and the result was an old-school beatdown and a world record for electric cars. The Model S P85D ran the quarter in 11.6 seconds at 114.6 miles per hour, the new mark for BEVs at the drag strip. Proving its pace, it ran three more times in 11.69, 11.72 and 11.76 seconds. It got from the start line to 60 miles per hour in 3.1 seconds. The Hellcat, well, it wasn't a race, really. It was the Hellcat's driver's first time at a drag strip and his first time trying to launch it, so after an excellent burnout ahead of the lights, he rolled to the line, almost jumped the start, balked at the real start and spun his tires for the first 100 feet down the strip. The theory is that he overheated his street tires during that burnout, and the resulting greasy rubber did what greasy rubber does. By the time he got to the other end 17.46 seconds later the Tesla driver had showered and was enjoying a funnel cake. When things go right, though, Dodge estimates the Hellcat will do 11.2-second runs on street tires and it has been clocked at 10.85 seconds at 126.18 mph on street-legal drag radials. There's video of the not-quite-a-race above, and Drag Times says there'll be a rematch between the two in a couple of weeks. News Source: Street Car Drags via YouTube Green Motorsports Dodge Tesla Coupe Electric Luxury Performance Videos Sedan drag racing dodge challenger srt hellcat

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

2013-14 Dodge Viper recalled over faulty door handles

The 2013-14 Dodge Viper is getting a voluntary recall affecting 1,762 cars worldwide to replace their door-handle assemblies. Of the affected vehicles, FCA US reports there are 1,451 in the US, 160 in Canada, 17 in Mexico and 59 of them outside of NAFTA. After receiving three reports of doors either not closing or opening while driving a low speeds, FCA US engineers found a new sealant from a supplier didn't provide sufficient moisture protection to the electronic switches for the door latches. If the parts get wet, this can potentially cause a short circuit. The automaker is quite clear that are no reports of accidents of injuries from this problem. As always, the recall repairs will be done at no cost to owners, and FCA US will be getting in touch with customers soon about the problem. Related Video: Statement: Door-handle Assemblies April 9, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 1,762 cars globally to replace their door-handle assemblies. FCA US launched an investigation after the Company received three warranty claims linked to doors that failed to close or opened inadvertently while vehicles were moving at low speed. The Company is unaware of any related injuries or accidents. Engineers determined a sealant, newly adopted by a supplier, provided inconsistent moisture protection to the electronic switches that control the door latches. Switches exposed to moisture may short-circuit. Affected are approximately 1,451 model-year 2013-14 Dodge Viper SRT cars in the U.S.; 160 in Canada; 17 in Mexico and 59 outside the NAFTA region. Affected customers will be notified and advised when they may schedule service, which will be performed at no cost. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403.