Dodge Ram Quad Cab Slt 4x4 Longbed 5.9 Cummins Diesel Auto Tow Bedliner on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

2015 Dodge Challenger SRT Hellcat with '600-plus horsepower' officially unveiled [w/video]

Dodge has officially unveiled the most powerful vehicle to ever wear the Challenger name - the SRT Hellcat - complete with over 600 horsepower courtesy of a supercharged, 6.2-liter Hemi V8. It will be offered alongside the 485-hp Challenger SRT.
The new, force-induced V8 isn't just the most powerful ever fitted to the Challenger, it's the most powerful eight-cylinder Chrysler Group has ever built. Power figures aren't finalized, so expect to see "over 600 hp" bandied about quite a lot. That fury will be channeled through either a six-speed manual or eight-speed automatic. Yes, over 600 ponies through an eight-speed auto. So far, the only vehicle we know of that delivers more output through that many gears is the as-yet untested Chevrolet Corvette Z06. Sadly, we don't have performance metrics just yet, although if this thing can't crack four seconds to 60 miles per hour, we'll be pretty surprised.
As is the theme nowadays, the 2015 Challenger SRT features a number of driving modes, governing power output, shift speeds for the 8AT, steering effort, traction control settings and suspension settings. There are three pre-programmed options - Default, Sport and Track - and a Custom mode that allows drivers to mix and match to their heart's content.

Hennessey's Dodge Challenger Hellcat cranks out 1,032 hp

Enthusiasts know the Dodge Challenger Hellcat produces 707 horsepower. It's one of the modern muscle-car era's iconic numbers. But for some, that's not enough. Enter Hennessey Performance. The Texas tuners loaded the Hellcat with a twin-turbocharger that works with Dodge's supercharger to boost output to 1,032 hp and 987 pound-feet of torque. Yes, that's an engine dyno rating, not at the rear wheels, but still! It's a little more complicated than a bolt-on booster. Called the HPE1000, the turbo kit has stainless steel headers and down pipes, billet aluminum compressor wheels, and a high-flow air system. There's also an an improved fuel pump, and the engine and chassis are specially calibrated. You also get numbered plaques signed by John Hennessey himself and the engine tech who builds your mill. All of this helps get your Hellcat to 60 miles per hour in 2.7 seconds, and it can do the quarter mile in 9.9 seconds at 142 mph. The Hellcat and it's 6.2-liter blown Hemi V8 are not for the faint of heart. Hennessey makes this Dodge downright demonic. Related Video: Related Gallery 2015 Dodge Challenger SRT Hellcat View 23 Photos Image Credit: Hennessey Performance Dodge Coupe Performance