2007 Dodge Ram 2500 Laramie Crew Cab Pickup 4-door 5.9l on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

The Dodge Neon is coming back... to Mexico

It's been a long time since we've seen a new Dodge Neon putt-putting around. But soon it will be back, and in North America, too, if you want to get technical about it. But this time, the Neon will be limited exclusively to Mexico. According to Ward's Auto, FCA is planning to import the Fiat Tipo to Mexico, but rebadged under the Dodge brand and with the Neon nameplate on the trunk... even if it doesn't have those signature round headlights, or a three-speed automatic transmission. Never heard of the Fiat Tipo? It debuted almost a year ago as the Aegea Project, and went into production shortly thereafter – similarly called the Egea in Turkey where it's made, but the Tipo in other European markets. It's a budget-oriented, C-segment compact with a range of four-cylinder engines, and though designed from the get-go as a four-door sedan, it rolled into Geneva last month in hatchback and wagon forms as well. The Tipo is built at the Tofas plant in Bursa, Turkey, alongside the Fiat Doblo – which is also shipped over to North America, rebadged as the Ram ProMaster City. In the Mexican market, FCA also sells the Fiat Siena sedan as the Dodge Vision, the Mitsubishi Mirage rebadged as the Dodge Attitude, and the Fiat Strada as the Ram 700 – all nameplates exclusive to our neighbors to the south. Whatever its origin, it'll be interesting to see a Neon again the next time we venture South of the Border – particularly considering that the Neon was arguably the last time that Chrysler had a competitive compact on its hands. The Caliber that followed never gained the same kind of traction, so to speak, and FCA recently ceased production (for the time being at least) of the Dodge Dart and Chrysler 200 to focus on larger trucks crossovers – the likes of which the Caliber tried to emulate (in style, if not in substance).

Dodge shows can-do attitude with grand Can'avan sculpture

There are lots of ways to celebrate an important birthday, and all of them are well deserved. You can throw a big party, buy yourself something nice, or - if you're the altruistic type - do something for others in need. The latter is how Chrysler has opted to mark the 30th anniversary of its Dodge Grand Caravan and Chrysler Town & Country.
Together with hunger-advocacy organization Canstruction, the Chrysler Foundation has built a full-scale replica of the Grand Caravan out of 30,000 food cans in the square at the corner of Yonge and Dundas in Toronto, a ways down the highway from where the real vans are built in Windsor. The sculpture was built over the course of 10 hours by 30 volunteers and was displayed earlier this week.
Now the installation is being taken down, and the cans of food are being donated to the Daily Bread Food Bank, which will assemble them into 2,000 food baskets to be distributed to those in need through its network of 200 food banks across the Canadian metropolis. Check out a neat time-lapse video of the build and the press release below.