2005 Dodge Ram 2500 4x4 Slt on 2040-cars

Auto blog

Dodge rolls out Shaker package for 2015 Challenger

Having an awesome Hemi engine under the hood can deliver impressive performance, but for those who lament not being able to see that big V8 engine doing its thing, hidden away under the hood, Dodge offers the Shaker hood on its Challenger muscle car. And it's just released the option for the updated 2015 model. Now available on two engines and three trim levels – including the Challenger R/T and R/T Plus with the 5.7-liter V8 and the 6.4-liter Challenger 392 – the new Shaker hood brings cold air into the engine compartment and lets everyone see that V8 (or at least an appendage thereof) shaking away in plain view. Arriving 45 years after the original Shaker Challenger, the package includes a satin black hood scoop, cold-air intake, conical air filter and optimized air box, along with Shaker graphics inside, out and under the hood. The 2015 Dodge Challenger R/T Shaker and R/T Plus Shaker are available to order now, priced at $35,495 and $38,495, respectively (plus a $995 destination charge), and come bundled with the Super Track Pak. Order books open in March for the 392 HEMI Shaker, which also comes with the Scat Pack, for $42,495 (plus destination and $1,000 gas-guzzler tax if equipped with the manual transmission). Dodge is Shaking Up the Muscle Car Segment Again; Opens Orders for New 2015 Challenger 'Shaker' Models Dodge Celebrates 45 Years of Its Functional "Cold-air Grabbing" Hood Scoop That "Shakes" With the Legendary HEMI® V-8 Engine's Movement - Back by enthusiast demand, Dodge returns the "Shaker" to the Challenger lineup – now expanding the functional cold-air induction hood scoop on two HEMI V-8 engines and three performance-packed models - "King of the Shakers" – all-new 2015 Dodge Challenger 392 HEMI Scat Pack Shaker combines the ultimate combination of 485 best-in-class horsepower and legendary Dodge heritage cues with a functional Shaker hood - Dodge Challenger R/T Shaker and R/T Plus Shaker models feature the legendary 5.7-liter HEMI V-8 engine with unique hood and intake design combined with a functional exposed-element cold-air intake system - New 2015 Dodge Challenger R/T Shaker and R/T Plus Shaker are available for ordering now, with the 392 HEMI Scat Pack Shaker model available for customer orders in March February 13, 2015 , Auburn Hills, Mich.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

121k Dodge Darts being investigated over braking problem

The National Highway Traffic Safety Administration is investigating the Dodge Dart due to reports of braking problems. Some 121,000 cars are possibly affected, all from the 2013 model year. According to The Detroit News, NHTSA received 18 complaints about the brake pedal becoming hard to depress on these cars, increasing stopping distance. Drivers reported hearing a "pop noise or an air hissing noise when applying the brake pedal, followed by a hard pedal feel and reduced brake effectiveness," NHTSA told the News. In a particularly terrifying incident, one driver says the Dart's braking system shut down while driving at 50 miles per hour. "I feared for my life. It is one of the scariest things I have ever dealt with," the complaint said, according to The Detroit News. A Fiat-Chrysler spokesperson said the automaker is "fully cooperating" with this investigation.