Blue Quad Cab 4x4 Rusty 148000 Miles on 2040-cars

Auto blog

Dodge Viper to out-Hell the Hellcat with supercharged V10?

The Viper wouldn't be the Viper if it wasn't the most powerful model under the Chrysler umbrella. But with the arrival of the Hellcat engine in the Dodge Charger and Challenger, the Viper has fallen behind in the bragging rights department: where the new supercharged V8 produces 707 horsepower and 650 pound-feet of torque, the naturally aspirated V10 offers "only" 640 hp and 600 lb-ft - gargantuan output figures by almost any other standard, but crucially behind on the SRT power scale. Conner Avenue is going to have to do something about that.
Although the Hellcat's engine reportedly won't fit under the Viper's hood, SRT is now rumored to have another trick up its sleeve: supercharge the existing V10. According to the Pentastar performance enthusiasts at allpar.com, Chrysler has already taken delivery of the first such prototype engines so that it can begin the process of fitting it into an upgraded Viper.
The spooled ten-pot is tipped to produce around 800 hp and 650 lb-ft of torque. More than that and the Viper's drivetrain, chassis and bodywork would have to be substantially reworked. Though beefier transmissions are available, fitting them would reportedly set off a domino-game of changes required to handle the added torque. Which may be something Chrysler would be prepared to do for the next-generation model, but in the meantime, 800 hp could prove enough to put the Viper back atop the Mopar performance ladder where it belongs, and give it an edge against the new Corvette Z06 to rekindle sales.

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

Hellcat no help to Fiat-Chrysler's bottom-of-the-pile mpg average

What, you expected the "fastest muscle car ever" to help fleetwide fuel economy? Nope, don't think that's going to happen. That means Fiat Chrysler will likely to continue to languish at the bottom of the heap when it comes to fleetwide fuel economy among the largest automakers serving the US, especially as the automaker starts to sell its Dodge Challenger SRT Hellcat. A few hundred Fiat 500E electric vehicles aren't going to turn the trend around. See, Chrysler has once again finished at the bottom of the list when it came to fleetwide fuel economy among automakers for 2014 model-year vehicles, according to a preliminary study by the US Environmental Protection Agency. Chrysler and Fiat had an average of 21.1 miles per gallon. That substantially lagged the overall 24.2 mpg average, but it was an increase from the company's 20.9 mpg average last year and the 20.1 mpg average two years prior. For 2014, General Motors had the second-worst fleetwide fuel economy at an even 22 mpg. Fiat Chrysler does say it's working on improving its fuel economy, according to Automotive News. The company plans on making its inline-four-cylinder and V6 engines smaller, and will sell more vehicles with eight- and nine-speed transmissions. Heck, there's even a plug-in hybrid version of the Chrysler Town & Country minivan in the works for late 2015, and the company can tout fuel-efficiency gains with the Chrysler 200 and Jeep Cherokee. We would be remiss if we didn't note that, compared to its muscle-car forefathers, the Hellcat actually performs pretty well at the pump. Last month, word got out that the 2015 Challenger Hellcat, equipped either with a six-speed manual or an eight-speed automatic transmission, got a combined fuel economy of 16 mpg. Heck, the automatic-tranny version got 22 mpg on the highway. And that's for a car with 707 horsepower and a 10-second quarter-mile time. Still, with the pedal floored, the car can burn a gallon and a half of fuel per minute. Ouch.