98 Dodge Ram Sport Quad Cab - Mechanics Special! on 2040-cars

Auto blog

2015 Dodge Challenger SRT 392

I've just started reading the third installment in a planned five-book biography of Lyndon Baines Johnson, Master of the Senate, written by the incomparable Robert Caro. Conveniently, a recent trip to drive the BMW X6 M and 228i Convertible was to be staged in Austin, TX, within easy driving distance of LBJ's birthplace, Johnson City. And yes, the city is named for his family. Having completed my duties with the Bimmers, I borrowed the spangled 2015 Dodge Challenger SRT 392 you see above, to squire me around the Texas capitol for a weekend, and as a lift out to the Hill Country homestead of our 36th President. Johnson City isn't exactly a road trip mecca, but there's a pretty good brewery, a museum, the reconstructed LBJ house to take snapshots of, and it's a nice drive to get out there if you've got a 485-horsepower muscle car at your disposal. Driving Notes With the heroic Hellcat, this 392 and the R/T Scat Pack (that Brandon Turkus reviewed recently), there are more SRT-treated Challengers to choose from than ever before. There are 707 obvious reasons that the Hellkitty is the top dog (as it were), but there are important difference between this 392 and the Scat Pack, too. Both cars make use of the 6.4-liter Hemi V8 putting out 485 horsepower and 475 pound-feet of torque, but the 392 also gets an adaptive suspension, six-piston Brembo brake calipers (instead of four-piston), wider tires, leather and Alcantara seats, a heated steering wheel, a louder stereo and HID headlights. When LBJ was campaigning for his seat in the House of Representatives, he would've loved to have something as potent as this monster of a V8 under the hood of his canvassing car. The 6.4L snorts with authority before it sends the big coupe forward to just about any speed I'd ask of it, and with a quickness. Johnson was known for haranguing drivers to step on it, when all that stood between himself and a few more votes was the ability to fit one more stump speech into the day. The 392 feels as though it could cover a quarter of the state of Texas in a morning if you throttle down deep enough (faster even than the Johnson City Windmill, I'd guess). Though there's a six-speed manual available, I'm actually quite fond of the eight-speed automatic in the 392. The two-pedal setup better suits the fast-cruiser attitude of the car, and it never served up any poorly conceived shift logic when I left it in D. Of course, the roads are better now than they were in the 1930s and 40s, too.

FCA adds 88k Dodge Challengers to Takata inflator recall

The Takata airbag inflator recall from FCA US is growing 88,346 vehicles larger in the US after the company's discovery of the faulty parts in the 2008-2010 Dodge Challenger. The affected examples have production dates between September 19, 2007, and October 29, 2010, and the coupes need the replacement components on the driver's side. According to chronology posted by the National Highway Traffic Safety Administration (as a PDF), the automaker was auditing the models covered under the campaign in July and "identified a population of vehicles that was inadvertently excluded." Initially, FCA believed these cars were using an unrecalled Takata inflator. The audit revealed that the affected cars indeed used a recalled version. As with the rest of the faulty parts, exposure to moisture can cause them to ignite too quickly during an airbag deployment and spray shrapnel at occupants. The problem has been linked to at least eight deaths worldwide and a vehicle fire in Japan. The Challenger wasn't previously part of FCA's 3.3-million unit national campaign or the subsequent expansion. According to FCA US the parts to complete the repairs in these Challengers aren't currently available. However, owners will be notified of the issue by mail starting August 14. They will receive a second notice when the parts become available. Related Video: RECALL Subject : Driver Side Frontal Air Bag Inflator May Rupture Report Receipt Date: JUL 10, 2015 NHTSA Campaign Number: 15V444000 Component(s): AIR BAGS Potential Number of Units Affected: 88,346 All Products Associated with this Recall Vehicle Make Model Model Year(s) DODGE CHALLENGER 2008-2010 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2008-2010 Dodge Challenger vehicles manufactured September 19, 2007, to October 29, 2010. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture. CONSEQUENCE: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. REMEDY: Chrysler will notify owners, and dealers will replace the driver's frontal air bag inflator, free of charge. Parts to remedy the vehicles are not currently available. Interim notices will be mailed to owners beginning August 14, 2015.

FCA and UAW deal could mean huge production shakeups

The big labor contract between Fiat Chrysler Automobiles and the United Auto Workers is likely to lead to some very serious production shakeups across the company's North American manufacturing operations. That's according to a new report from Automotive News, which details the sweeping changes at no fewer than five production facilities in Michigan, Illinois, Ohio, Mexico, and Poland. So without further ado, here's what's going where, presented in easy to digest bullet form. Ram 1500 production would move from Warren, MI to Sterling Heights, MI Warren, MI would be retooled for unibody production and would handle the Jeep Grand Wagoneer and could potentially build Grand Cherokees to ease the strain on Detroit's Jefferson North factory Chrysler 200 production would move from Sterling Heights, MI to Toluca, Mexico Dodge Dart production would move from Belvidere, IL to Toluca, Mexic Fiat 500 production, which is currently handled by Toluca, would be concentrated in Poland, where the Euro-spec Cinquecento is built Jeep Cherokee production would move from Toledo, OH to Belvidere, IL to make room for Wrangler and Wrangler Pickup production Like we said, those are some big changes. But, as FCA CEO Sergio Marchionne said in an earlier interview with Automotive News, this kind of shakeup would make a lot of sense. In that August interview the exec said that automakers moved truck production to Mexico because they were "threatened" by the UAW. "The only thing [the UAW] want is to move the truck back. Which is right. If you move the truck back here, which is [the UAW's] domain, [and move] all the cars that we get killed on somewhere else, we could actually make sense of this bloody industry and actually increase the number of people employed in this country and really share wealth because we are making money," Marchionne told AN. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA toluca warren sterling heights