2007 Dodge Ram 1500 on 2040-cars

Auto blog

Chrysler recalling 700k minivans and Dodge Journey for ignition switch woes

General Motors isn't the only automaker with ignition switch problems. Chrysler is fighting it too and is now announcing a recall of 695,957 examples worldwide of the Chrysler Town & Country and Dodge Grand Caravan minivans from the 2008-2010 model years, plus the 2009-2010 Dodge Journey.
According to a statement from Chrysler, the models have a bad wireless ignition node detent ring in the ignition switch, making it possible for drivers to appear to have the key in the "Run" position but for the spring not to fully engage. It can then slip back to the "Accessory" position and shut the car off. If this happens, the vehicle loses power steering, brake boost and the airbags.
There is some disparity about the number of vehicles affected under this recall. In its statement, Chrysler claims that it covers 525,206 vehicles in the US, 102,892 in Canada, 25,591 in Mexico and 42,268 elsewhere. However, the recall announcement posted by The National Highway Traffic Safety Administration lists an estimated 438,109 vehicles in the US. Chrysler spokesperson Nick Cappa told Autoblog via email that the reasoning for the different figures "will become clear at a later date."

2016 Jeep Wrangler recalled over impact sensor wiring

Fiat Chrysler just announced a pair of recalls totaling nearly 311,000 units. The bigger recall affects certain 2016 and 2017 model year Jeep Wranglers. Although, since FCA claims all of the affected 2017s are in the company's hands, really, only 2016 owners should pay attention here. The affected Wranglers suffer from an issue where wiring disconnects from impact sensors in certain types of crashes, potentially preventing the airbags and pretensioners from activating. FCA uncovered the problem in what its press release calls "a routine, in-house crash test" and claims "service availability is imminent." The affected Jeeps require a simple rewiring. The other recall, announced Tuesday, is more of a fleet issue, affecting 2007 to 2013 model-year Ram 2500 and 3500 pickups and 3500, 4500, and 5500 chassis cabs and 2011 to 2014 Dodge Charger Pursuit police vehicles. There's a problem with "premature diode wear" in alternators that are subject to "frequent load cycling, at or near maximum amperage, [or] in hot ambient temperatures." Affected alternators could short out, causing a vehicle to stall or potentially catch fire. FCA lists 182,743 affected Wranglers in the US, 18,011 in Canada, 3,087 in Mexico, and 20,948 in global markets. The Ram/ Charger Pursuit recall lists 74,833 vehicles in the US, 10,077 in Canada, 1,088 in Mexico, and 134 outside the NAFTA region. Of all those vehicles, the Jeep recall hasn't caused any injuries or fatalities, while FCA says it's aware of one "potentially related injury" and no accidents due to its fleet vehicle recall. FCA says it will notify owners/operators of affected vehicles when service appointments are available. As per usual, all the work is free of charge. Related Video:

2015 Dodge Viper getting small increase in power

The Viper is used to being the most powerful car in the Dodge and SRT stables, but the arrival of the 2015 Dodge Challenger SRT Hellcat means that's no longer the case. The serpentine supercar is, however, reportedly getting a small boost in output for 2015, amounting to all of five horsepower.
The increase was uncovered by Road & Track courtesy of the SAE J1349 certification process to which Detroit's Big Three automakers submit themselves and which reports the Viper's output at 645 hp instead of the 640 it was rated at until now. There are a hundred factors that could have contributed to the relatively mild boost in output (best guess? nothing at all changed...), but we doubt anyone's going to complain about some extra horses under the hood.
The five-horsepower boost brings the Viper that much closer to the 650-hp Chevy Corvette Z06, not to mention the 707-hp Hellcat, but the Viper's impressive power-to-weight ratio ought to mean it'll have little problem keeping up in a straight line - which is just one of the reasons why Chrysler won't shoe-horn the Hellcat into the Viper: as R&T points out, the supercharged engine is too heavy and the blower makes it too tall to fit in the Viper's engine bay.