2006 Dodge Ram 1500 St Standard Cab Pickup 2-door 4.7l on 2040-cars

Auto blog

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

Rare Dodge Shelby Dakota is a very '80s sport truck

The late-great Carroll Shelby built an incredibly successful career of making all sorts of cars faster, more often than not, with a bigger or more potent engine under the hood. The icons are well known—legends like the Shelby Cobra, GT350 Mustang, and the big GT500. But by the 1980s, Shelby was plying his trade over at Chrysler, at the behest of chairman Lee Iacocca, churning out special editions like the Dodge Shelby Charger, zippy CSX, rorty GLHS, and this—the 1989 Shelby Dakota muscle truck. 1,500 of these racy pickups were built for just one year and a whole two-and-a-half decades later they still turn heads. This one especially. The spotless pickup recently turned up for sale online , and its odometer reads a claimed 25,307 miles. So what makes these rarified work trucks special? As with most Shelbys, it starts under the hood. Up until 1989, the standard Dodge Dakota pickups were offered in only four-cylinder and V6 variants. But Dodge (and Shelby) wanted more, so the larger 5.2-liter Magnum V8 from Dodge's full-size pickup was shoehorned into the midsize Dakota, albeit not effortlessly. To fit, Dodge had to swap the V8's belt-driven fan for an electric unit mounted in front of the radiator. That did the trick, as well as earned the V8 a few extra ponies, pushing the special Dakota up to 175 horsepower and 270 lb.-ft. of torque. That performance may sound paltry by today's standards, but in 1989 it was seen as quite sporty, and netted a zero to 60 mph dash in 8.5 seconds. A four-speed automatic with lockup torque converter transmitted that power to the rear wheels. Additional Shelby performance goodies included a limited-slip differential, transmission cooler, along with a host of eye-catching body mods, including a unique air dam and bumpers, Shelby floor mats, monogramed seats and door panels, a "CS" steering wheel, 15-spoke hollow alloy wheels, and shouty body graphics. While the Shelby Dakota didn't return for 1990, its V8 legacy did continue, and in 1991 the 5.2-liter eight-cylinder became an option on new Dakotas. Of the 1,500 Shelby Dakota pickups built, 860 were dressed in red while a rarer 640 came adorned in Bright White. This '89 is said to be #245 of those white trucks, sold new to its original (and sole) owner in Mechanicsburg, Pennsylvania, for $15,985 (the Shelby package cost $3,933 in its day). Currently, it's demanding bids north of $10,000 for its low-mileage originality. Related Video: This content is hosted by a third party.

Chrysler recalls AWD 300, Charger, Ram 1500 over ZF transmission

What do the Chrysler 300, Dodge Charger and Ram 1500 all have in common? Yes, they're all Chrysler products, and two of them are based on the same platform. And we're sure you could find more similarities between them all, but the common trait we're looking at here is that, while they all come standard in rear-drive form, they're also available with all-wheel drive. And it's the transmission in those models that's the subject of the latest recall notice issued by the National Highway Traffic Safety Administration.
The output shaft on the eight-speed automatic transmission supplied by ZF to Chrysler for the AWD versions of the 300, Charger and Ram 1500 is apparently prone to fracture. That in the end could leave the vehicle without power and could, according to the NHTSA investigation, increase the chance of a crash. The vehicle could also roll away if even if left in Park without the handbrake applied.
That's why Chrysler is calling in 4,194 examples of those three models from the 2013 model year. Dealers will be responsible for inspecting the transmissions and, where necessary, replace the entire unit. See the full recall notice below for all the details.