2004 Dodge Ram 1500 Slt Standard Cab Pickup 2-door 4.7l on 2040-cars

Auto blog

Rare Dodge Shelby Dakota is a very '80s sport truck

The late-great Carroll Shelby built an incredibly successful career of making all sorts of cars faster, more often than not, with a bigger or more potent engine under the hood. The icons are well known—legends like the Shelby Cobra, GT350 Mustang, and the big GT500. But by the 1980s, Shelby was plying his trade over at Chrysler, at the behest of chairman Lee Iacocca, churning out special editions like the Dodge Shelby Charger, zippy CSX, rorty GLHS, and this—the 1989 Shelby Dakota muscle truck. 1,500 of these racy pickups were built for just one year and a whole two-and-a-half decades later they still turn heads. This one especially. The spotless pickup recently turned up for sale online , and its odometer reads a claimed 25,307 miles. So what makes these rarified work trucks special? As with most Shelbys, it starts under the hood. Up until 1989, the standard Dodge Dakota pickups were offered in only four-cylinder and V6 variants. But Dodge (and Shelby) wanted more, so the larger 5.2-liter Magnum V8 from Dodge's full-size pickup was shoehorned into the midsize Dakota, albeit not effortlessly. To fit, Dodge had to swap the V8's belt-driven fan for an electric unit mounted in front of the radiator. That did the trick, as well as earned the V8 a few extra ponies, pushing the special Dakota up to 175 horsepower and 270 lb.-ft. of torque. That performance may sound paltry by today's standards, but in 1989 it was seen as quite sporty, and netted a zero to 60 mph dash in 8.5 seconds. A four-speed automatic with lockup torque converter transmitted that power to the rear wheels. Additional Shelby performance goodies included a limited-slip differential, transmission cooler, along with a host of eye-catching body mods, including a unique air dam and bumpers, Shelby floor mats, monogramed seats and door panels, a "CS" steering wheel, 15-spoke hollow alloy wheels, and shouty body graphics. While the Shelby Dakota didn't return for 1990, its V8 legacy did continue, and in 1991 the 5.2-liter eight-cylinder became an option on new Dakotas. Of the 1,500 Shelby Dakota pickups built, 860 were dressed in red while a rarer 640 came adorned in Bright White. This '89 is said to be #245 of those white trucks, sold new to its original (and sole) owner in Mechanicsburg, Pennsylvania, for $15,985 (the Shelby package cost $3,933 in its day). Currently, it's demanding bids north of $10,000 for its low-mileage originality. Related Video: This content is hosted by a third party.

Dodge Charger Hellcat makes 1,032 hp with Hennessey help

Sometimes you just want four doors. Earlier this week we brought you Hennessey's riff on the Dodge Challenger Hellcat. Now comes the Charger. Much like its two-door sibling, the Charger gets boosted to as much as 1,032 hp and 987 lb-ft of torque (at the crank) thanks to the addition of a twin-turbocharging setup that works with the factory supercharger. The turbo headers and downpipes are stainless steel, and there is a high-flow air-to-water intercooler and dual-turbo waste gates. Hennessey also beefs up the fuel injectors, fuel pump, and the rest of the fuel system. The engine management system and chassis are recalibrated to accommodate all of this. You also get numbered plaques signed by John Hennessey, the boss of the Texas tuning outfit, and the technician who does your build. Hennessey's additions result in zero-to-60 mph sprints in 2.7 seconds, and the big sedan can run the quarter mile in 9.9 seconds at 142 mph. Like the Challenger, the Charger has the same disclaimer: the lofty horsepower figure comes from an engine dyno, and it will be a 15-to 20-percent lower at the rear wheels. Related Video: Image Credit: Hennessey Performance Dodge Performance Sedan Hennessey dodge charger hellcat

How to update and secure a vulnerable Chrysler Uconnect system

If you own one of the 1.4 million vehicles affected by the recent Chrysler software recall, you may want to watch this video. In it, we explain how to get the latest infotainment software loaded onto the 8.4-inch Uconnect system. The recall was a response to the findings of researchers who were able to hack into and remotely control a 2014 Jeep Cherokee through its cellular connection. Although Fiat Chrysler has worked with Sprint to plug most of the holes on the carrier side, there are still some vulnerabilities that only this latest software version can patch. Owners have three options to get the update: download it now, wait for a USB stick in the mail, or take the vehicle to an FCA dealer. Chrysler will be sending USB sticks loaded with the software update to customers. Anyone with an internet connection and a USB stick of their own with at least 4 GB capacity can speed things up by downloading the patch from the Uconnect website. We cover that process from start to finish in the video, with the final portion still applicable to those using the FCA-supplied USB stick. If after watching this you still don't want to tackle the patch yourself, you can take your vehicle to the dealer to have it done. Also note that this process is the same for all Uconnect updates, not just the one patching the exploits. Our demonstrator vehicle is a 2015 Ram 1500 pickup. The procedure should be very similar on other products with the 8.4-inch Uconnect system, with only the location of the USB port varying. Once you have the USB stick with the software on it – either after having downloaded it yourself or receiving it in the mail from Chrysler – the installation process is relatively simple. It takes about 15 minutes to perform the update; we edited out the wait in the video. To check whether or not your car's 8.4-inch Uconnect system is running the latest software, go to System Information on the touch screen's Settings page and look at Software Version. The update related to the recall is version 15.17.5. Related Video: Recalls Chrysler Dodge Jeep RAM Safety Technology Infotainment Videos Original Video hacking