100% Rust Free 1999 Texas Truck With Extended Cab, 2 Wheel Drive on 2040-cars

Auto blog

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat

New Viper 'is a possibility,' Sergio Marchionne says

It was thought the door to the future for the Dodge Viper had closed last year, but Fiat Chrysler CEO Sergio Marchionne reopened it during his press conference at the 2016 Detroit Auto Show. Marchionne said the current Viper is the only FCA product to use the ZD platform, which "doesn't make sense to me." Yet, "given the architectural development within the brand, there is a possibility that a new version of the Viper may surface." Automobile reports that the company uses a versatile, rear- and all-wheel drive Giorgio platform for Alfa Romeo and Dodge. It will support the Alfa Romeo Giulia (Alfa Romeo's larger BMW 5 Series competitor), the next-generation Dodge Challenger, Charger, and rumored Barracuda, and it could support a new generation of Viper. We're probably talking about a different kind of Viper, though, with Automobile saying, "the current car's truck-based V-10 no doubt would be scrapped along with its platform." A Viper without a V10 doesn't seem like a Viper to us, but we'll wait to see what happens. In the midst of contract negotiations for a new labor agreement between FCA and the United Auto Workers last year, it emerged that the Conner Avenue Assembly plant that builds the Viper hadn't been given any new product after the end of Viper build-out in 2017. That led most to reason that the current Viper would be the end of the 25-year run of America's hairiest sports car. How long we'll be waiting is unknown. Marchionne had no timetable and admitted that a future Viper might not appear on the heels of the current one. With a renewed commitment to being debt-free by 2018, FCA is likely more focused on getting Alfa Romeo running properly and cranking out the volume variants for the Giorgio platform first. Related Video: Featured Gallery 2014 SRT Viper GTS: Review View 36 Photos News Source: Automobile via World Car FansImage Credit: Copyright 2015 Drew Phillips / AOL Detroit Auto Show Dodge Coupe Performance Sergio Marchionne FCA conner avenue assembly plant

Junkyard 1983 Dodge Rampage has Franco-American roots

Lee Iacocca and the K-Cars get most of the credit for saving Chrysler after the company's 1979 bailout by the US government, but the success of the Simca-derived Omnirizon platform was a large, if overlooked, component of Chrysler's early-1980s resurgence. The Dodge Omni and Plymouth Horizon were sold in the United States for the 1978 through 1990 model years, and variants included the 1983-1987 Dodge Charger and the Rampage, this well-worn example of which I spotted in a Denver self-service wrecking yard last week. The early Omnirizons came with a Volkswagen-sourced 1.7-liter engine, but all of the Rampage pickups (and their near-identical Plymouth Scamp siblings) came from the factory with a 2.2-liter K-Car engine making 96 horses. This truck has a 4-speed manual transmission, which would have made it reasonably quick by Malaise Era standards. This one had plenty of body filler and rust, even before the crash that sent it on that final tow-truck ride to this place, so it wouldn't have been worth restoring. Still, we can hope that some of its parts will live on in other L-body trucks. Related Video: Featured Gallery Junked 1983 Dodge Rampage in Denver View 16 Photos Chrysler Dodge Automotive History Truck Classics dodge rampage